Features :

NUT2NT+ is designed to maximize use-case flexibility.

• Operates over all GNSS standards: GPS, GLONASS, Galileo, BeiDou, IRNSS, and future standards
• Receives all GNSS bands: L1/L2/L3/L5, G1/G2/G5, B1/B2, E1/E5, and future bands
• High-throughput data streaming: with continuous streaming of up to 50 Mbytes/sec over USB 3.0 Type-C
• Fast processing: with a Lattice ECP5 FPGA
• Open source software: for spectrum and GNSS signal monitoring
• Low power consumption: utilizes 5 V @ 0.3 A over USB
• Small form-factor: main board dimensions are 100 mm x 50 mm x 10 mm
• Power injector circuit: for antennas with a DC short like a dipole or PIFA. The circuit is software-controllable.
• Available accessories: including enclosures and antennas

Block Diagram:

NUT2NT+ Hardware

• Receiver chip: NT1065
• USB 3.0 controller: CYUSB3014 , USB 2.0 mode supported
• USB connector: USB 3.1 Type-C
• Lattice ECP5 FPGA: 12K LUTs + 28 DSP blocks (LFE5U-12) opened for custom design
• Clock: 10 MHz TCXO, soldered
• RF inputs: two, bands dedicated
• RF inputs: referred noise floor - 5 dB
• ADC resolution: two-bit
• ADC frequency: up to 99 MHz
• Samples transfer: continuous full stream, from 10 to 50 Mbytes/sec
• Power consumption: 5 V @ 0.3 A from USB
• Size: 100 mm x 50 mm x 10 mm
• GNSS standards: GPS, GLONASS, Galileo, BeiDou, IRNSS, and future standards
• All GNSS band: L1/L2/L3/L5, G1/G2/G5, B1/B2, E1/E5, and future bands
• Power injector circuit: for antennas with a DC short

Software :

 The software includes:

• A signal dumper (grabber) software
• Spectrum analyzer software
• Support for the libusb API
• Support for the native Cypress driver API
• Availability for Windows, Linux, and potentially all other OS’s with libusb
• GPS L1, GLONASS L1/L2 satellite signal correlation examples
• GNURadio support and an example spectrum view GNURadio application
• GNSS-SDR support, tested on GPS and GLONASS L1 signals in real-time and with a captured samples file

Package Contents : 

1 x NUT2NT+ (Antennas are not inclueded)