Teensy

The Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing hundreds of differrent types of projects. All programming is done via the USB port. No special programmer is needed, only a standard "Mini-B" USB cable and a PC or Macintosh with a USB port.
Key Features:
- USB can be any type of device
- 8-bit AVR processor, 16 MHz
- or 32-bit ARM Cortex 48 MHz !!
- Single pushbutton programming
- Easy to use Teensy Loader application
- Free software development tools
- Works with Mac OS X, Linux & Windows
- Tiny size, perfect for many projects
- Available with pins for solderless breadboard
- Very low cost
Refine Search
SparkFun DEV-28370 / DEV-20359 / DEV-16771 / DEV-28369 / DEV-20360 / DEV-16996 Teensy 4.1 Development Board
Teensy 4.1 features the fastest micocontroller and an expanded set of powerful peripherals in a 2.4 ..
रo 2,627.08 रo 3,127.08
SparkFun DEV-15583 / DEV-16997 / Dev-28368 Teensy 4.0 Development Board
Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 crossover MCU, the fa..
रo 2,467.00
SparkFun DEV-18615 Ethernet Kit for Teensy 4.1
Order now and get in 3-4 daysThis kit has all the parts needed to connect to the Ethernet port on Te..
रo 1,048.96
SparkFun COM-28379 / COM-28380 Color 320x240 TFT Touchscreen, ILI9341 Controller Chip
This 320x240 color TFT display is recommended for use with Teensy 3.2, for high resolution color gra..
रo 1,855.20
SparkFun DEV-15845 Audio Shield For Teensy 4.0 (Rev D)
This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio ..
रo 1,035.00
SparkFun PRT-28372 Teensy 3.2-4.1 OctoWS2811 Adaptor
This adaptor board connects Teensy 3.2 - Teensy 4.1 to thousands of LEDs using the OctoWS2811 Librar..
रo 1,077.89
SparkFun KIT-28374 PT8211 Audio Kit for Teensy 3.x
PT8211 Audio Kit for Teensy 3.x PT8211 is a 16 bit stereo digital to analog conve..
रo 267.37 रo 317.89
Teensy LC - Development Board
Teensy-LC (Low Cost) is a powerful 32 bit microcontroller board, with a rich set of hardware periphe..
रo 1,229.00 रo 1,194.00
Adafruit 3200 Teensy 3.x Feather Adapter
You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and..
रo 833.67
Audio Adaptor Board for Teensy 3.0 to 3.6 (Rev C)
This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio ..
रo 1,705.00 रo 1,947.00
SparkFun CAB-28389 USB Host Cable For Teensy 3.6 or Teensy 4.1
This short cable allows connecting a USB device, or a USB hub to Teensy 3.6 or Teensy 4.1.Teensy 3.5..
रo 318.95
SparkFun COM-28391 PSRAM Chip for Teensy 4.1
This PSRAM chip can add 8 Megabytes of RAM for use on Teensy 4.1.The following PSRAM chips have been..
रo 262.11
SparkFun PRT-13925 Teensy Header Kit
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of hea..
रo 285.27
Teensy 3.2 With CAN-Bus Breakout Board
This is a CAN-Bus breakout board for use with the Teensy 3.2 (included). It comes with an on-board 5..
रo 5,860.00
Adafruit 4828 SmartMatrix SmartLED Shield for Teensy 4
The SmartLED Shield gives you an easy way to connect up a Teensy 4 or a Teensy 4.1 to one of our RGB..
रo 3,682.11
Teensy to XBee Adaptor Kit
This kit lets you easily connect Teensy to a XBee wireless module. The Arduino XBee Li..
रo 717.00 रo 820.00
Teensy to WIZ812 Ethernet Adaptor Kit
This kit lets you easily connect Teensy to a WIZ812 ethernet module. The Arduino Ethernet ..
रo 466.00 रo 533.00
Prop Shield With Motion Sensor
The Prop Shield is meant interactive light and sound effects on small handheld props and wearable co..
रo 2,331.00 रo 2,775.00
Micro SD Card Adaptor for Teensy
This Micro SD card adaptor allows you to easily use gigabytes of flash memory with Teensy. It can al..
रo 239.00 रo 273.00
Prop Shield, Low Cost (no Motion Sensors)
This Electret Condenser Microphone is meant to be used with the Teensy Audio Adaptor. It is PUI Audi..
रo 1,004.00 रo 1,195.00
USB Cable with 5-Pin Micro-B Plug
This standard USB 5-pin Micro-B cable is needed to connect Teensy LC or Teensy 3.2 to your PC or Mac..
रo 478.00 रo 546.00
SparkFun COM-28378 WIZ820io and Micro SD Card Adaptor for Teensy
This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ820io eth..
रo 588.42
SparkFun COM-28383 Microphone For Audio Adaptor
This Electret Condenser Microphone is meant to be used with the Teensy Audio Adaptor. The microphone..
रo 262.50
Pre-programmed Bootloader Chip for DIY Teensy LC and 3.2 Projects
By using this chip and a blank MKL26Z64VFT4 or MK20DX256VLH7, you can build your own Do-It-Yourself ..
रo 813.00 रo 929.00
MINI54 Chip With Pre-Programmed Teensy 3.0 Bootloader
Product code: IC_MINI54_TQFPBy using this Mini54 chip and a blank MK20DX128VLH5 or MK20DX256VLH..
रo 956.00 रo 1,160.00
Pre-programmed ATMEGA32U4 Chip for DIY Teensy Projects
Pre-programmed ATMEGA32U4 Chip for DIY Teensy Projects For developing projects, we highly recomm..
रo 693.00 रo 792.00
SPI Flash Memory Add-ons for Teensy 3.X
128 Mbits or 1 Gbit of fast flash memory attached directly to your Teensy! What is it? Spans..
रo 1,685.00
Teensy 3.2 With CAN FD Breakout Board
This is a CAN-Bus FD breakout board with the Microchip MCP2517FD CAN FD controller and Teensy 3.2. I..
रo 6,995.00





-228x228.jpg)







-228x228.png)














