WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors. The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios.

The ESP32 series of ICs are SOCs that integrate 2.4GHz Wi-Fi and Bluetooth dual-mode, with ultra-high radio frequency performance, stability, versatility, reliability, and ultra-low power consumption.

Features:

Support complete TCP/IP protocol stack
Rich wireless communication interface
Multiple working modes using through holes and half-pads

Specifications:

Wi-Fi	RF Certifications	FCC/CE/RoHS
	Protocols	802.11 b/g/n/e/i（802.11n，Up to 150 Mbps）
	Protocols	A-MPDU and A-MSDU aggregation, 0.4_ s guard interval support
	Frequency range	2.4~2.5 GHz
Bluetooth	Protocols	Bluetooth v4.2 BR/EDR and BLE standards
Bluetooth	Radio	NZIF receiver with -97 dBm sensitivity
Hardware	Network port specifications	RJ45, 10/100Mbps, Cross-direct connection adaptive
	Serial baud rate	80~5000000
	On-board flash	32Mbit
	Operating voltage	5V or 3.3V
	Operating current	Average: 80mA
	Supply current	Minimum: 500 mA
	Operating temperature	-40°C~+85°C
	Ambient temperature	Normal temperature
	Packaging	Half pad/ Through-hole connector( Optional
Software	Wi-Fi mode	Station/softAP/SoftAP+station/P2P
	Wi-Fi security mechanisms	WPA/WPA2/WPA2-Enterprise/WPS
	Encryption types	AES/RSA/ECC/SHA
	Firmware update	Remote OTA upgrade via network
	Software development	SDK used for further development
	Networking protocol	IPv4, TCP/UDP
	IP access methods	Static IP,DHCP（Default）
	Transparent transmission modes	TCP Server/TCP Client/UDP Server/UDP Client
	User configurations	AT+ commands set