1.5inch RGB OLED Display Module, 65K RGB Colors, 128×128 Resolution, SPI Interface

1.5  RGB OLED DISPLAY MODULE

• Embedded 1351 Driver, Using SPI Bus
• Comes with examples for Raspberry Pi, Arduino, STM32, etc.

• Size:1.5″ 
• Resolution:128×128
  
• Display Color:65K RGB
• Interface: SPI
• Display Panel: OLED
• Driver:1351
  

Features:

• 128×128 resolution OLED display, 65K RGB colors, clear and colorful displaying effect
• SPI interface, minimizes required IO pins
• Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications:

Controlled Via SPI Bus

Supports Controller Boards Like Raspberry Pi/Arduino/STM32

• VCC Power (3.3V/5V input)
• GND Ground
• DIN Data input
• CLK Clock input
• CS Chip selection, low active
• DC 4-wire SPI: Data/Command selection (high for data, low for command)

                    3-wire SPI: connect to GND, keeping low level

• RST Reset, low active

Hardware Connection

Connecting With Raspberry Pi

Connecting With Arduino Board

Outline Dimensions:

• Wiki

• 1 x 1.5inch RGB OLED Module
  
• 1 x PH2.0 7PIN cable