HealthyPi is the first fully open-source, full-featured vital sign monitor. Using the Raspberry Pi as its computing and display platform, the HealthyPi add-on HAT turns the Raspberry Pi into a vital sign monitoring system.
HealthyPi V4 HAT is a wireless, wearable, open source vital signs monitor powered by ESP32
Specifications:
-
HealthyPi V3 HAT:
- ECG and respiration front-End: Uses the TI ADS1292R 24-bit analog front-end with SNR of 107 dB
- Pulse oximetry: Uses TI AFE4400 Pulse Oximetry front-end with integrated LED driver and 22-bit ADC
- Temperature: Uses Maxim MAX30205 digital body temperature sensor for skin temperature sensing
- Main microcontroller: Atmel ATSAMD21 ARM Cortex M0 - compatible with Arduino Zero
- Programmability: Arduino Zero Bootloader preloaded
- Interfaces: Raspberry Pi 40-pin header (UART pins connected), USB CDC device, extra UART connector provided for connecting an external blood pressure module
- IoT functionality: Can use the Raspberry Pi's Wi-Fi interface to communicate with a TCP client for telemedicine applications or using an MQTT client for continuous logging applications
- GUI Compatibility: Uses processing Java-mode (compiles on MacOS/Windows/Linux/Linux-ARM platforms)
- Firmware compatibility: Compiles with Arduino or Atmel Studio
- Dimensions (board only): 65 mm x 56.5 mm x 6 mm
- Weight: 100 g
-
HealthyPi V4 HAT:
- Microcontroller and wireless connectivity: ESP32, in WROOM32 module format, with a Dual-core Xtensa 32-bit CPU, 4 MB of on-board flash, Wi-Fi, and support for BLE
- Wireless interface: Wi-Fi and Access Point (AP) modes, a 2.4 GHz radio with an on-board PCB antenna that is compatible with Bluetooth 4.2 and BLE
- Firmware programming: Supports Arduino IDE as well as Espressif ESP-IDF
- Sensors:
- ECG and respiration front end: Texas Instruments (TI) ADS1292R 24-bit analog front end with signal-to-noise ratio (SNR) of 107 dB
- Pulse oximetry front end: TI AFE4400 pulse oximetry front end with integrated LED driver and 22-bit ADC
- Temperature sensor: Maxim MAX30208 digital body temperature sensor for monitoring skin temperature
- Form factor: Raspberry Pi HAT form factor (65 mm X 56 mm)
Package Includes:
-
HealthyPi V3 HAT Kit
- 1 x HealthyPi v3 PCB
- 3 x Electrode cable with "button" connectors on one end and stereo connector on the other end
- 1 x Finger-clip Spo2 probe with "Nellcor-compatible" DB9 connector
- 1 x Cable-mounted digital skin temperature sensor with stainless steel contacts.
- 1 x sheet of 20 Single-use disposable ECG electrodes (Covidien Medi-Trace)
- 1 x HAT mounting kit with headers and screws for stacking up the board with a Raspberry Pi
-
HealthyPi V4 HAT Kit
- 1 x HealthyPi v4 main board
- 1 x 1000 mAh battery
- 3 x Electrode cable with ECG "snap connectors" on one end and a stereo connector on the other
- 1 x Sheet of 20 single-use ECG electrodes
- 1 x Finger-clip SpO₂ probe with a Nellcor-compatible DB9 connector
- 1 x Qwiic-based temperature sensor
- 1 x HAT mounting kit with headers and screws for stacking HealthyPi v4 atop a Raspberry Pi
HealthyPi HAT Kit
- Brand: Crowd Supply
- Product Code:CS-HealthyPi-HAT-Kit
- Reward Points:315
- Availability:Discontinued
-
रo 37,181.80
- Ex Tax:रo 31,510.00
- Price in reward points:31510