The reTerminal is a Human-Machine Interface facility, designed in modularization, offered multiple interfaces and components. It is your hand-size, powerful, Raspberry Pi-based all-in-one board, assisting you to develop individual IoT & AI projects and being ready to materialize industrial-level monitor and control functions.

Features:

• Perfect match for Home Assistant Users: easy connection with Zigbee and will support Matter specifications in the future with a firmware update from Home Assistant.
• High performance, low power, and secure solutions: powered by EFR32MG21 Wireless SoC, 2.4GHz Multi-Protocol USB Transceiver, supports full-speed USB 2.0 when plugged into the included USB extender.
• Reliable communications: transmits at a power of +20 dBm.
• Runs 2 protocols simultaneously: dual-protocol operation(Zigbee, Matter).
• Consistent Firmware Updates: Over-The-Wire (OTW) firmware update support.

Specifications:

• Platform
• Processor: Broadcom BCM2711 quad-core Cortex-A72 (ARM v8)
• Frequency: 64-bit SoC @ 1.5GHz
• Memory:
• Capacity: 4GB
• Technology: LPDDR4 with on-die ECC
• eMMC:
• Capacity: 32GB
• Wireless:
• Wi-Fi: 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac
• Bluetooth: Bluetooth 5.0, BLE
• Display:
• LCD: 5-inch 720x1280 LCD
• Touch Panel: Capacitive touch panel (support multi-touch)
• Video:
• HDMI: 1 x Micro HDMI output (up to 4Kp60 supported)
• CSI: 1 x 2-lane MIPI CSI camera interface
• Multimedia:
• H.265 (4Kp60 decode)
• H.264 (1080p60 decode,1080p30 encode)
• OpenGL ES 3.0 graphics
• Built-In Modules:
• Real-Time Clock:
• NXP Semiconductors PCF8563T
• Low backup current; typical 0.25μA at VDD = 3.0 V and Temperature = 25 ℃
• Accelerometer:
• STMicroelectronics LIS3DHTR
• 16-bit, ±2g/±4g/±8g/±16g dynamically selectable full scale
• Encryption:
• Microchip ATECC608A
• Secure Hardware-Based Key Storage, Asymmetric Sign, Verify, Key Agreement
• Light Sensor:
• Levelek LTR-303ALS-01
• Digital light sensor
• Internal IO: Expansion Microchip MCP23008-E
• Buzzer: ≥85dB @10cm 2700±300Hz
• External I/O:
• GPIOs:
• Up to 5 × UART
• Up to 5 × I2C
• Up to 5 × SPI
• 1 × SDIO interface
• 1 × DPI (Parallel RGB Display)
• 1 × PCM
• 1 × PWM channel
• Up to 3× GPCLK outputs
• Vertical expansion interface:
• 1 × PCIe 1-lane Host, Gen 2 (5Gbps)
• 1 × USB 2.0 port (highspeed)
• 26 x GPIOs
• POE
• Power:
• Recommended: 5V@4A DC
• Dimensions: 140mm x 95mm x 21mm

Applications:

• Embedded Linux Terminal Device
• Smart Factory
• Smart Warehouse
• Smart Home 
• Machine Learning and Edge AI Applications
• IoT Controller
• Hand-Held Device

Documentations:

• Wiki

Warranty:    

• 12 months
• Warranty will not apply if Product fails or is damaged after delivery to you due to accident, abuse or misuse.

Package Includes:

• 1 x reTerminal
• 1 x Screw Driver