This reRouter CM4 1432 is equipped with dual Gigabit Ethernet ports and dual USB 3.0 ports, making it suitable for soft router applications, while keeping the hardware to a minimum. We have pre-installed a Raspberry Pi Compute Module 4 with 4GB RAM and 32GB eMMC to enable fast boot-up times and a smooth overall experience.

• It features a variety of I/O peripherals such as MIPI CSI, MIPI DSI, micro-HDMI to connect displays/ cameras, a standard 9-pin USB 3.0 header for more USB expansion, a micro-SD card slot, and an FPC connector while maintaining a compact form factor! This board is ideal for HTPC makers, Linux developers, software router enthusiasts, and the majority of regular Raspberry Pi users.

• Also, this comes included with a PC/ABS case with an Aluminum alloy on top which has a large sink in order to cool down the CM4 at extreme loads. It provides better protection as well and is suitable to be used in industrial applications.

Features

• Fast boot times and smooth overall experience: Powered by Raspberry Pi Compute Module 4 and 4GB RAM/32GB eMMC
• Compact and highly integrated: 75x64x21mm in size, with dual Gigabit Ethernet ports and dual USB3.0 ports
• Highly scalable with rich IO peripherals: dual Gigabit Ethernet connectors, Micro-SD card slot, micro-HDMI interface, USB 3.0, MIPI CSI, MIPI DSI, etc.
• Easy to deploy with stability: DIN rail mount and keyhole slot allow you to hang it anywhere
• Pre-installed OpenWrt firmware: Out of the box, can easily implement software router applications

Out of the two Gigabit Ethernet Ports (RJ45), one Ethernet Port is connected to the Gigabit Ethernet PHY of the CM4 module which is based on Broadcom BCM54210PE. On the other hand, the other Gigabit Ethernet Port is connected to Microchip's LAN7800 which is a USB 3.0 to GbE (Gigabit Ethernet Bridge). The USB 3.0 interface here is extended from the PCIe interface of the CM4 Module. Also, both ports can support speeds up to 1Gbps.

Heat Maps:

The case has long rubber feet for better stability when placed on a flat surface. You can mount this case in two different methods. One is to use the keyhole slot wall mount and hang it on the wall (you can hang in 2 different orientations). The other is to use the 3 mounting holes and mount onto a DIN rail.

Wall Mount (horizontal and vertical orientations):

DIN Rail Mount:

Note： Now we have Sliding Block for Linear Guideway Rail For reRouter， Check here to see more！

OpenWrt Pre-Installed

The Compute Module 4 comes with OpenWrt firmware pre-installed out-of-the-box. This means you just need to unbox the package, take out the board, connect to your existing home network and have your own mini router!

• OpenWrt is an open-source Linux operating system which runs on embedded devices/ routers. It offers more features, performance, and security than a traditional router. It has a filesystem that’s fully writable and includes a package management system. You can make use of these packages to suit your applications in various ways. Once you connect this board to your home network and access the router from a web browser, you will be presented with a beautiful and interactive dashboard as follows.

You can navigate this dashboard, and you will have access to a bunch of features such as:

• Increase overall network performance when multiple devices are connected
• Share files between devices via an external storage drive connected directly to the router
• Increase network security
• Run a BitTorrent client from the router
• Connect a printer directly to the router to create a networked printer
• Limit bandwidth usage of a particular device in the network
• Active queue management
• Real-time network monitoring
• Create Dynamic DNS
• Set Up a VPN client or server
• Block ads on the network

By utilizing the above features, you will have unlimited possibilities with this reRouter CM4 1432!

What is a Router?

A router is a piece of hardware that connects a Local Area Network (LAN) to other networks. In most cases, this “other network” is known as a Wide Area Network (WAN), or none other than the Internet. The router is very much the “administrator” of this local network and plays an important role in managing connected devices. While their primary role is true to simply coordinate connections and forward data, routers are very much small computers themselves.

Why choose Raspberry Pi 4 for the home router？

• 1. Increase Network Bandwidth and Performance
• While the Raspberry Pi is definitely weaker in comparison to a full-fledged desktop or laptop, its Broadcom CPU is certainly more than enough when it comes to network routing. Thus, a Raspberry Pi router will surely be a boost to your network and give you greater internet speeds!
• 2. Improve Network Security
• With a Raspberry Pi Router, you’ll be able to choose from free, open-source operating systems like OpenWrt that are community reviewed and maintained for security!
• 3. Enjoy Additional Features
• With the accompanying hardware and I/O, using a Raspberry Pi as a router grants you flexibility in adding more features.
• Read this blog for more details.

Similar Routers that You might be interested in:

• CM4 Router: CM4 Router Board is an expansion board based on the Raspberry Pi Compute Module 4.
• Dual Gigabit Carrier Board: It features a variety of I/O peripherals such as MIPI CSI, MIPI DSI, micro-HDMI to connect displays/ cameras, and a standard 9-pin USB 3.0 header for more USB expansion, and a micro-SD card slot, and an FPC connector while maintaining a compact form factor!
• Dual Gigabit Ethernet NICs CM4 Carrier Board: This CM4 carried board is ideal for HTPC makers, Linux developers, software router enthusiasts, and the majority of regular Raspberry Pi users.
• Similar Mini Server that You might be interested in:
• ODYSSEY - X86J4105 allows you to simply build Edge Computing applications with powerful CPU and rich communication interfaces.
• ZimaBoard 832 model is a low-cost single board server equipped with Intel Celeron N3450 Quad Core working distinguishingly as a 4T free charge cloud server or a 4K display media server.

Applications

• Software Router
• IoT applications
• Smart Home
• Camera / Video-related Projects

Hardware Overview:

ECCN/HTS

• HSCODE 8471419000
• USHSCODE 8471410150
• UPC
• EUHSCODE 8471707000
• COO CHINA
• CE 1
• EU DoC 1
• FCC 1
• RoHS 1
• TELEC 1
• UK DoC 1

Documentations:

• Schematics
• Microchip LAN7800 Datasheet
• Blog

Package Includes:

• 1 x Dual Gigabit Ethernet Carrier Board for Raspberry Pi CM4 with 4GB RAM, 32GB eMMC
• 1 x Aluminum Case
• 1 x International Wall Adapter Power Supply 5VDC 4A – Type-C (with US/AU/UK/EU plugs)