SX1262 LoRaWAN Node Module Expansion Board For Raspberry Pi, With Magnetic CB Antenna, Options For Frequency Band And GNSS Function

SX1262 LoRaWAN/GNSS HAT

• SX1262 RF Chip LoRa Module, Suitable For Sub-GHz Band Network.

Features At A Glance

• This series of products are LoRa modules using the new generation of SX1262 RF chip, with the features of long communication distance and strong anti-interference ability. Suitable for Sub-GHz frequency band network, and is available in LF (410~510MHz) or HF (850~930MHz) frequency band versions. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network. In addition to the basic LoRaWAN version, it also provides optional GNSS positioning function with GPS/BD support.
• Common features:
• Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards
• The new generation SX1262 has higher power efficiency and longer transmission distance than the SX1278
• Suitable for Sub-GHz band, combined with the gateway, can be quickly connected to a cloud server such as TTN to build a LoRaWAN network
• GNSS version features:
• Onboard L76K module with GPS/BD support, provides accurate clock and location info for node module
• Onboard button cell holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
• Onboard 4 LED indicators for module operating status
• Comes with online development resources and manual (example in C)

Version Options

• LoRaWAN basic version

• SX1262 433/470M LoRaWAN HAT
• Suitable for LF band, comes with a magnetic CB antenna and an IPEX adapter cable
• SX1262 868/915M LoRaWAN HAT
• Suitable for HF band, comes with a magnetic CB antenna and an IPEX adapter cable

LoRaWAN/GNSS version:

• SX1262 433/470M LoRaWAN/GNSS HAT
• Suitable for LF band, comes with a magnetic CB antenna, a GPS antenna and IPEX adapter cables (2PCS)
• SX1262 868/915M LoRaWAN/GNSS HAT
• Suitable for HF band, comes with a magnetic CB antenna, a GPS antenna and IPEX adapter cables (2PCS)

* Please select the frequency version according to the local radio management regulations

Specifications:

Pinout Definition:

What's On Board

• SX1262
• LoRa module
• L76K
• GNSS module
• Power chip
• 5V to 3.3V LDO
• GPS STANDY mode ON/OFF
• OFF: turn off STANDY and GPS works normally
• ON: turn on STANDY, GPS stops outputting NMEA
• SET button
• Press to wake up the GNSS module in sleep mode
• GNSS module IPEX 1 connector
• L76K antenna connector
• LoRa module IPEX 1 connector
• LoRa antenna connector
• Status Indicator
• PWR: power indicator
• RXD/TXD: UART RX/TX indicator
• PPS: GPS status indicator
• Raspberry Pi 40PIN GPIO header
• for connecting with Raspberry Pi series boards
• LoRa module and GNSS module pin header

Application Examples

• Industrial Control
• Intelligent Home
• Data Acquisition...

Documentation:

• Wiki
  

Package Includes:

• SX1262 433/470M LoRaWAN HAT
• 1 x SX1262 433/470M LoRaWAN HAT 
• 1 x 433/470M Magnetic CB antenna 
• 1 x IPEX to SMA adapter cable ~17cm 
• 1 x Screws pack 
• 1 x 20PIN female pinheader x2
• SX1262 868/915M LoRaWAN HAT
• 1 x SX1262 868/915M LoRaWAN HAT 
• 1 x 868/915M Magnetic CB antenna 
• 1 x IPEX to SMA adapter cable ~17cm 
• 1 x Screws pack 
• 1 x 20PIN female pinheaderx2
• SX1262 433/470M LoRaWAN/GNSS HAT
• 1 x SX1262 433/470M LoRaWAN/GNSS HAT
• 1 x 433/470M Magnetic CB antenna 
• 1 x GPS antenna 
• 2 x IPEX to SMA adapter cable ~17cm 
• 1 x Screws pack 
• 1 x 20PIN female pinheader x2

• SX1262 868/915M LoRaWAN/GNSS HAT
• 1 x SX1262 868/915M LoRaWAN/GNSS HAT
• 1 x 868/915M Magnetic CB antenna 
• 1 x GPS antenna 
• 2 x IPEX to SMA adapter cable ~17cm 
• 1 x Screws pack 
• 1 x 20PIN female pinheader x2