LC76G Multi-GNSS Module, Supports GPS, BDS, GLONASS, Galileo, QZSS

LC76G GNSS Positioning Module:

• Supports GPS, Beidou(BDS), Glonass, Galileo, QZSS
• I2C/UART Communication, Provides Multi-Platform Resources And Tutorials For Secondary Development And Integration

Features:

The LC76G GPS Module is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS, Galileo and QZSS systems, allows multi-system combined or single-system independent positioning. Supports EPO (Extended Predictive Orbit) and EASY (Embedded Assist System) function, provides a good positioning experience of fast, accurate, high-performance.

• Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS
  
• Supports UART and I2C communication
• Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity
• Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function
• Supports 1PPS
• UART communication baudrate: 9600~921600bps (115200bps by default)
• Onboard rechargeable Li battery MS621FE, for preserving ephemeris information and hot starts
• 2x LEDs for indicating the module working status
• Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/Jetson Nano/Arduino/ESP32)

Parameters Comparison:

Compatible With Multiple Platforms:

• Provides Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino Demos And User Manuals, Easier To Develop And Integrate, And Better Expansibility

• Multi-GNSS Positioning Support
• Supports GPS, Beidou(BDS), Glonass, Galileo, QZSS

What's On Board:

Pinout Definition:

• VCC: Power supply (3.3V/5V)
• GND: Gound
• TX: Connect to MCU.RX (Signal direction: TX >> MCU.RX)
• RX: Connect to MCU.TX (Signal direction: MCU.TX >> RX)
• PPS: GPS status indicator
• RST: Reset Pin
• SDA:I2C data pin
• SCL: I2C clock pin

Product Show:

Outline Dimensions:

Documentation:

• Wiki

Package Includes:

• 1 x LC76G GNSS Module
  
• 1 x GH1.25 8PIN cable

This product is suitable for outdoor positioning (comes with active GPS ceramic antenna by default), if you need to position indoor, it is recommended to purchase: GPS external antenna (with IPX to SMA Adapter) (antenna is placed to the window area, the module is within 3.5m from the antenna).