1.51inch Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, Light Blue Color Display

• 1.51inch Transparent OLED
• Embedded Independent Driver Chip, Using SPI/I2C Interfaces
• Comes with examples for Raspberry Pi, Arduino, STM32, etc.

• Size:1.51"
• Resolution:128×64
• Display Color: Light Blue
• Interface: SPI/I2C
• Display Panel: OLED 
• Driver :Embedded driver

Features:

• OLED transparent module, full viewing angle
• Adopts 4-wire SPI and I2C interface, better compatibility, fast data rate
• Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications:

• Working Voltage: 5V/3.3V
• Communication Interface: SPI/I2C
• Controller: SSD1309
• Resolution: 128 × 64
• Display Size: 35.05 × 15.32 (mm)
• Pixel Size: 0.254 × 0.254 (mm)
• Board Size: 41 × 22.5 (mm)
• Display Color: Light Blue

 there is a non-transparent white area on the side of the cable, but it can be displayed

• SPI And I2C Control Interface Switching
  
• Supports Controller Boards Like Raspberry Pi/Arduino/STM32

• VCC Power (3.3V / 5V input)
• GND Ground
• DIN       SPI / I2C data input
• CLK SPI / I2CI clock input
• CS  Chip selection, low active
• DC Data/Command selection (high for data, low for command)
• RST Reset, low active

Hardware Connection

Connecting With Raspberry Pi

Connecting With Arduino Board

Usage Example

Outline Dimensions

Documentation:

• Wiki

Package Includes:

• 1 x 1.51inch Transparent OLED
• 1 x PH2.0 7PIN cable
• 1 x Screws pack