• Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency
  
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE), with onboard antenna
• Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
• Type-C connector, keeps it up to date, easier to use
• Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color
• Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture
• Onboard 3.7V lithium battery recharge/discharge header and 6 × GPIO pins via SH1.0 connector
• Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
• Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions

Small Size, Touch More Possibilities:

• Suitable For Various Smart Devices Development, Can Realize Human-Computer Interaction Function

What's On Board:

• ESP32-S3R2
• The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 2MB PSRAM
• W25Q128JVSIQ
• 16MB NOR-Flash
• CH343P
• USB to UART chip
• ME6217C33M5G
• 800mA output, low dropout, high rejection rate
• ETA6096
• high-efficiency Lithium battery recharge manager
• QMI8658
• 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.
• MX1.25 battery header
• MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging
• USB Type-C connector
• supports USB1.1 hosts and slave devices
• RESET button
• BOOT button
• Press it before resetting to enter download mode

Pin Definition:

Documentations:

• Wiki

Package Includes:

• 1 x ESP32-S3-Touch-LCD-1.28