- Low power, high-performance gas, pressure, temperature, and relative humidity sensor in a single package
- Detects a broad range of VOCs (Volatile Organic Compounds)
- Supports I2C, SPI 3-wire, and SPI 4-wire interfaces
- Overvoltage, reverse polarity and signal contention protection of all signal pins
- VIN / GND reverse polarity protection
- Compatible with 3.3 V and 5 V microcontrollers
- Breadboard-friendly 6-pin header with 0.1” spacing, plus two mounting holes
- air quality monitoring
- Home automation and control
- Weather forecast
- Warning system for high temp, low-humidity conditions
- Context awareness, e.g. skin moisture detection, room change detection
- Vertical velocity indicator (rise/sink speed)
- Indoor navigation, e.g. change of floor detection, elevator detection
- Altitude tracking and calories expenditure for sports activities
- Power requirements: +3.3 VDC to +5 VDC; maximum 20 mA
- Typical current consumption:
- 3.7 µA at 1 Hz humidity, pressure and temperature
- 0.09‒12 mA for p/h/T/gas depending on operation mode
- 0.15 µA in sleep mode
- Absolute barometric pressure: range 300–1100 hPa; ±0.12 hPa
- Relative humidity: range, 0–100%; ±3%
- Temperature: range -40 to +85 °C; resolution 0.01°C, ±0.5°C typical
- Gas sensor resolution: 0.08% typical
- Communication: I2C (100 or 400 kHz) or SPI (3 and 4 wire, up to 10 MHz)
- Operating temperature: -40 to +185 °F (-40 to +85 °C),
- Operating environment: 0‒100% r.H., 300‒1100 hPa
- Form factor: 6-pin male header with 0.1" spacing
- PCB dimensions: 20 x 18 mm
- Mounting holes: Two holes suitable for #3 UNC (M2.5) hardware
Documents:
Package Include:
- 1 x BME680 Environmental Sensor
Parallax 28061 BME680 Environmental Sensor
- Brand: Parallax Inc.
- Product Code:Plx-28061-BME680-Sensor
- Reward Points:36
- Availability:In Stock
-
रo 4,213.78
- Ex Tax:रo 3,571.00
- Price in reward points:3571
-
- 4 or more रo 4,179.56
- 8 or more रo 4,146.52
- 20 or more रo 4,112.30
- 45 or more रo 4,078.08
Related Products
Parallax 29125 DS1302 Real Time Clock Module
The DS1302 Real-Time Clock Module provides a DS1302 real-time clock with a 32 kHz crystal and on-boa..
रo 861.40 Ex Tax:रo 730.00
Gravity: I2C BME680 Environmental Sensor
DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor base..
रo 1,975.32 रo 2,276.22 Ex Tax:रo 1,674.00
BME680 Breakout - Air Quality, Temperature, Pressure, Humidity Sensor
The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor ai..
रo 3,511.68 Ex Tax:रo 2,976.00
Temperature, Pressure, Humidity And VOC BME680 Wireling
This Wireling lets you measure Temperature, Pressure, Humidity, and Volatile Organic Compounds (VOCs..
रo 2,013.08 Ex Tax:रo 1,706.00
Fermion: BME680 Environmental Sensor (Breakout)
BME680 Environmental Sensor Module is a 4-in-1 multi-functional MEMS environmental sensor which inte..
रo 1,770.00 रo 2,031.96 Ex Tax:रo 1,500.00
WisBlock Environmental Sensor
RAK1906 is a WisBlock Sensor that extends the WisBlock system with environmental air quality and con..
रo 2,667.98 Ex Tax:रo 2,261.00
Adafruit 5046 BME688 - Temperature, Humidity, Pressure and Gas Sensor - STEMMA QT
The long-awaited BME688 from Bosch gives you all the environmental sensing you want in one small pac..
रo 2,540.54 Ex Tax:रo 2,153.00
Grove - Temperature, Humidity, Pressure and Gas Sensor for Arduino - BME680
The Grove-Temperature&Humidity&Pressure&Gas Sensor(BME680) is not just a simple Arduino ..
रo 2,485.08 Ex Tax:रo 2,106.00
Tags: Parallax, BME680, Environmental, Sensor
