Fully assembled 3.2inch display with 320×240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C4 / N2 / N2+ / C1 / C1+ / C0.

2×13 tall female header is already soldered on the PCB.

Fast 30Mhz SPI is used for the faster frame rate.

You will need an official Ubuntu image to configure it.

You can simply download the Kernel updates and configure your ODROID-C4 / N2+ / N2 / C1 / C1+ / C0 for this display shield.

The display doesn’t work with the ODROID-C2.

Please follow the step by step guide from the WiKi. If not, the display doesn’t work.

https://wiki.odroid.com/accessory/display/3.2inch_tft_touchscreen_shield/start

Note: this display is NOT compatible with Android platform.

Specifications:

LCD Type: TFT
LCD Interface: SPI
Touch Screen: Resistive
Touch Screen Controller: XPT2046 (SPI)
Colors: 65536 (16bit RGB-565)
Backlight: LED
Resolution: 320 x 240 pixels
Aspect Ratio: 4:3

Limitation : GPU/VPU Hardware acceleration required OpenGL-ES and Video playback are not supported.

To playback a video on this screen, you need a trans-coded 320×240 video file with FFMPEG software decoding.

Interface Connector

Compatible with ODROID-C0, ODROID-C1+, ODROID-C4, ODROID-N2, ODROID-N2+

Note:

The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.

Please find more details here: Supplier warranty terms and conditions: https://www.hardkernel.com/agreement

Interface Connector

Pin #	Symbol	Description
1, 17	3.3V	Power positive (3.3V power input)
2, 4	5V	Power positive (5V Power input)
3, 5, 7, 8, 10, 22	NC	NC
6,9,14,20,25	GND	Ground
11	TP_IRQ	Touch Panel interrupt, low level while the Touch Panel detects touching
12	KEY1	Key
13	RST	Reset
15	LCD_RS	LCD instruction control, Instruction/Data Register selection
16	KEY2	Key
18	KEY3	Key
19	LCD_SI / TP_SI	SPI data input of LCD/Touch Panel
21	TP_SO	SPI data output of Touch Panel
23	LCD_SCK / TP_SCK	Serial clock of LCD/Touch Panel
24	LCD_CS	LCD chip selection, low active
26	TP_CS	Touch Panel chip selection, low active