13.3inch Full Color E-Paper Display:

With ESP32-S3 E-Paper Driver Board

Compatible with development environments such as Arduino-IDE, ESP-IDF, etc.

Based on ESP32-S3-WROOM-2-N32R16V module

Features:

This ESP32-S3 E-Paper driver board is a compact-size microcontroller development board with 60PIN e-paper display connector. Adopts ESP32-S3-WROOM-2-N32R16V module, which is equipped with Xtensa 32-bit LX7 dual-core processor with 240MHz running frequency, built-in 512KB Static RAM (TCM), 16MB PSRAM and 32MB Flash. Supports Wi-Fi and BLE dual-mode communication, onboard TF card slot, low power audio codec, ETA6098 high-efficiency Lithium Batt recharge manager and MX1.25 Lithium Batt header. Onboard CH343 and CH334 USB HUB chips, supports USB and UART development at the same time via a Type-C port. Adapting multiple GPIO pins for easy expansion with a variety of peripheral devices.

You can choose Arduino-IDE, ESP-IDF, or other development environments in software so that you can easily and quickly get started and apply it to the product.

Driver board features:

• Adopts ESP32-S3-WROOM-2-N32R16V module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
• Integrated 512KB Static RAM, 384KB ROM, 16MB PSRAM, 32MB Flash memory
• Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance
• Type-C connector, easier to use
• Onboard CH343 and CH334 USB HUB chips, supports USB and UART development at the same time via a Type-C port
• Onboard 13.3inch E6 e-paper display connector, supporting direct connection to a 13.3inch E6 full color e-paper display
• Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications
• Onboard Lithium Batt recharge manager ETA6098 and MX1.25 lithium Batt header
• Onboard TF card slot for external TF card storage of pictures or files

E-paper display features:

• Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturation
• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing

e-paper display Specifications:

• operating voltage : 3.3V : display color : E6 full color(E Ink Spectra 6)
• interface : 3-wire SPI, 4-wire SPI : grey scale : 2
• outline dimensions : 284.70 × 208.80 × 0.85mm : full refresh time : 19s
• display size : 270.40 × 202.80mm : total refresh power : <0.5W
• DOT PITCH : 0.169 × 0.169mm : standby power : <1mW
• RESOLUTION : 1600 × 1200 pixels : viewing angle : >170°

E Ink Spectra 6 technology:

E Ink Spectra 6 is a newly launched full color e-paper technology that brings fresh vitality to the e-paper industry with excellent color performance, high resolution and high contrast.

Adopts red, yellow, and blue as the primary colors, it offers more possibilities for e-paper color display, featuring high contrast and high saturation to make images clearer and colors brighter.

More advanced performance:

The resolution is up to 200ppi, features a wider range of operating temperature and faster screen refresh time. And it is more power-saving, aligning with ESG trends for energy efficiency and carbon reduction

Innovative microcup full color technology platform:

Using white, red, yellow, and blue charged particles to produce six primary colors, and employing dithering technology to create vivid and saturated full color images.

Advantages of EINK:

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Supports ESP-IDF, Arduino IDE:

Comprehensive SDK, dev resources, tutorials to help you easily get started

What's On Board:

• ESP32-S3-WROOM-2-N32R16V : Xtensa 32-bit LX7 dual-core processor, the SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 32MB Flash and 16MB PSRAM
• TPS63020DSJR : DC/DC boost chip
• EA3036CQBR : Power management chip
• USB HUB chip
• USB to serial chip
• ES8311 DAC audio encoder chip : high-performance and low-power consumption audio DAC
• ES7210 ADC audio decoder chip  :high-performance and low-power consumption audio ADC, supports multiple-channel microphone inputs
• NS4150B : audio power amplifier chip 
• ETA6098 : High-efficiency Lithium Batt recharge manager
• MX1.25 2PIN Lithium Batt header : for connecting Lithium Batt
• MX1.25 2PIN speaker header : Audio output signal, for connecting external speaker
• TF card slot : The TF card must be formatted to FAT32 before use
• BOOT button : press it and power on again to enter download mode
• RESET button
• Type-C port : ESP32-S3 USB port, for program burning and log printing
• Microphone
• E-paper display connector

outline dimensions:

Resources & Services:

Documentations:

• Wiki

Pacakage Includes:

• 1 x ESP32-S3-ePaper-13.3E6 e-Paper driver board
• 1 x 13.3inch e-Paper (E)
• 1 x e-Paper Adapter (B)
• 1 x 8Ω 1W speaker
• 1 x 60PIN FPC cable ~10cm