• Description
• Reviews (0)

2.7inch E-Paper E-Ink Display HAT (B) For Raspberry Pi, 264×176 Pixels, Red / Black / White Three-Color, SPI Interface

• 2.7" E-PAPER HAT (B)
• Low Power, Wide Viewing Angle, Paper-Like Displaying Without Electricity
• Ideal for price tags, shelf labels, industrial instruments...

Features At A Glance:

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
• Onboard voltage translator, compatible with 3.3V / 5V MCUs
• Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

• OPERATING VOLTAGE 3.3V/5V
• DISPLAY COLOR red, black, white
• INTERFACE 3-wire SPI, 4-wire SPI
• GREY SCALE 2
• OUTLINE DIMENSIONS 73.50 × 56mm
• FULL REFRESH TIME 15s
• DISPLAY SIZE 57.288 × 38.192mm
• REFRESH POWER 26.4mW (typ.)
• DOT PITCH 0.217 × 0.217mm
• STANDBY CURRENT <0.01uA (almost none)
• RESOLUTION 264×176 pixels
• VIEWING ANGLE >170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

• Compatible With Raspberry Pi Series Boards, Jetson Nano

Raspberry Pi in the photo is NOT included.

Onboard SPI Control Interface

• For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

VCC  :3.3V/5V

GND :Ground

DIN :SPI MOSI pin

CLK :SPI SCK pin

CS :SPI chip selection, low active

DC :Data / Command selection (high for data, low for command)

RST :External reset, low active

BUSY:Busy status output, low active

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.

Outline Dimensions:

Documentation:

• Wiki

Package Includes:

• 1 x 2.7inch e-Paper HAT (B)
• 1 x RPi screws pack (2pcs) 
• 1 x PH2.0 20cm 8Pin

Write a review

Please login or register to review

Waveshare 13357 2.7inch e-Paper e-Ink Display HAT (B) For Raspberry Pi, 264×176, Red / Black / White, SPI

• Brand:: Waveshare
• Product Code: :WaveS-13357-2.7inch-e-Paper
• Reward Points: :19
• Availability: :Out Of Stock

• रo 1,987.38

• रo 1,669.47

• Price in reward points: 1988

• ---

• 8 or more रo 1,971.58
• 16 or more रo 1,955.80
• 40 or more रo 1,940.00
• 80 or more रo 1,924.20