This short cable allows connecting a USB device, or a USB hub to Teensy 3.6 or Teensy 4.1.
- Teensy 3.5 & 3.2 are not supported. While Teensy 4.0 has USB host capability on bottom-side pads, this cable does not mate directly with Teensy 4.0. Only Teensy 3.6 and 4.1 have the pads for a 5 pin header to mate with this cable.
- To use this cable, you will also need to solder pins to Teensy 3.6 or 4.1.
- The overall length is approx 8 inches (20 cm). The portion that is flexible cable is approx 5.5 inches (14 cm).
Teensy 3.6 / 4.1 and pins are sold separately.
Package Includes:
- 1 x USB Host Cable For Teensy 3.6 or Teensy 4.1
Related Products
SparkFun DEV-18615 Ethernet Kit for Teensy 4.1
Order now and get in 3-4 daysThis kit has all the parts needed to connect to the Ethernet port on Te..
रo 1,048.96
SparkFun PRT-28372 Teensy 3.2-4.1 OctoWS2811 Adaptor
This adaptor board connects Teensy 3.2 - Teensy 4.1 to thousands of LEDs using the OctoWS2811 Librar..
रo 1,077.89
Audio Adaptor Board for Teensy 3.0 to 3.6 (Rev C)
This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio ..
रo 1,705.00 रo 1,947.00
SparkFun DEV-28370 / DEV-20359 / DEV-16771 / DEV-28369 / DEV-20360 / DEV-16996 Teensy 4.1 Development Board
Teensy 4.1 features the fastest micocontroller and an expanded set of powerful peripherals in a 2.4 ..
रo 2,627.08 रo 3,127.08
SparkFun PRT-29292 Straight Header - Male (PTH, 2mm, 2x3-Pin)
This is a simple 2x3 male PTH header. Each pin has a spacing of 2mm in between each other.This is th..
रo 60.00
SparkFun PRT-29920 Ethernet Adapter for Teensy
The SparkFun Ethernet Adapter for Teensy lets users connect their Teensy 4.1 to the Internet via Eth..
रo 590.53