Based on those Maduino solutions, Makerfabs can also help to customize those boards with customer’s special requests. Contact [email protected] / [email protected] for detailed info and further discussion. More detail you can read our PCB Design and PCBA Turnkey Solution.

This is the new version v3.3.

Maduino Zero A9G is an IoT (Internet of things) Solution based on the 32-bit Atmel’s SAMD21 MCU and GPRS/GSM GPS module A9G. It integrates a micro Controller ATSAMD21G18, GRRS/GSM GPS module A9G, which is the upgrade version of Maduino GPRS A7, power management and storage, to make the A9G ready for a real project for IoT projects such as smart-home, outdoor monitoring, etc. The Maduino Zero A9G is based on the Arduino, users can program it with Arduino IDE, which is very easy especially suit for the none-programmers. There are also guide for users to learn how to create the first IoT project with this board, with which the starters can learn the hardware and programming skill quickly. With this board, you will easy to add text, SMS, and data to your project. It is good for your smart home project or GPS tracker and so on.

Features:

BAT Input Voltage: 3.4-4.2V
ATSAMD21G18, 32-Bit ARM Cortex M0+
Micro SIM connector
Integrated Power Control System
Support AT Command
Quad-Band: 850/900/1800/1900Mz
Support GPS
Support GPRS data traffic, the maximum data rate, download 85.6Kbps, upload 42.8Kbps
Support SMS Text Messaging
Support USB Power Charge
Support Micro SD Card
Interface: I2C/SPI/UART/18*GPIO
Arduino Compatible
Working Temperature: -40 – 85℃
Default Baud Rate: 115200
Size: 40mm*55mm