The Prop Plug Rev D  provides a USB-to-serial port connection that is convenient for microcontroller programming and communication. This tiny device is capable of asynchronous communication at up to a 3 M baud with both 3.3-volt and 5.0-volt devices such as the Propeller and BASIC Stamp microcontrollers. The Prop Plug slips onto a 4-pin, 0.1" spaced header, allowing both printed circuit boards and breadboards to provide in-circuit programming capability.

• USB to serial port conversion   
• Capable of asynchronous communication up to 3 M baud   
• Compatible with 3.3 and 5 V microcontrollers   
• Connects to a 4-pin, 0.1" spaced header  

Note:

• This revision has a USB A to Micro B port (no longer Mini B), and FTDI FT231X chip.A USB A to micro B cable is required, not included.

Specifications:

• Voltage requirements: 5 VDC (supplied by USB port)
• Current requirements: ~15mA (typical)
• Communication: asynchronous serial @ up to 3Mbps
• Connection: USB microB; 4-pin female SIP socket with 0.1" spacing
• Operating temp range: -40 to +185 °F (-40 to +85 °C)

Documents:

• Prop Plug Rev

Package Includes:

• 1 x  Prop Plug Rev