ESP32-C6 1.54inch LCD display:

development board

Supports AI Speech Interaction, Online LLM Platforms, And DIY Customization

Version Options:

• ESP32-C6-LCD-1.54-EN without touch control and Lithium Batt
• ESP32-C6-LCD-1.54 without touch control, comes with a 3.7V Lithium Batt (can be installed inside the case)
• ESP32-C6-Touch-LCD-1.54-EN with touch control, without Lithium Batt
• ESP32-C6-Touch-LCD-1.54 with touch control, comes with a 3.7V Lithium Batt (can be installed inside the case)

Features:

This product is designed by Waveshare, featuring a custom-molded square plastic case, offering a compact and premium appearance. Onboard 1.54inch LCD display, 6-axis sensor, dual microphones array, and TF card slot, providing the hardware foundation for display, sensing, voice, and multimedia storage. With these hardware resources, it supports fun interactive mini-games, voice wake-up, noise reduction, and echo cancellation. It allows access to online AI large model platforms, enabling intelligent voice interaction and continuous upgrades. The factory firmware includes built-in functions such as AI conversation, audio playback, photo album, text reading, and a gravity ball game. It can be used directly as an AI chatting toy, while also supporting customization and secondary development.

Key features:

• Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency
• Supports 2.4GHz Wi-Fi 6 and Bluetooth 5, onboard antenna, with superior RF performance
• Built-in 512KB Static RAM, 320KB ROM, and external 16MB flash
• Type-C port, improving device compatibility, easier to use
• Onboard 1.54inch LCD display for clear color picture display, 240 × 240 resolution, 262K color
• Onboard ES7210 audio encoding chip for dual microphones audio capture and echo cancellation
• Onboard ES8311 audio codec chip, NS4150B amplifier chip, microphones, and speaker
• Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture to expand applications
• Adapting I2C, UART, and other pin pads for external device connection and debugging, enabling flexible peripheral configuration
• Onboard two customizable function buttons for operations such as single-click, double-click, and long press
• Onboard 3.7V MX1.25 Lithium Batt recharge/discharge header
• Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

LCD parameters

• Display panel : IPS : Display Size : 1.54inch
• Display Resolution : 240 × 240 resolution : Display Color : 262K
• Communication interface : 4-wire SPI : Driver IC : ST7789
• Touch Type (Touch Version Only) : Capacitive touch : Touch IC (Touch Version Only) : CST816
• Active Display Area : 27.72 × 27.72 (mm)

Small Size, Touch More Possibilities

Suitable For Various Smart Device Development, and Can Realize Human-Computer Interaction Function. Supports connecting to a Batt for independent operation

• for touch version only

Function Overview:

IPS Display Panel:

Excellent display performance, 262K color, 240 × 240 resolution,

with wide viewing angle

Wi-Fi 6 and BLE 5 support:

Supports Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread),

Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh

Supports ESP-IDF, Arduino IDE:

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

What's On Board:

• ESP32-C6 : Integrated RISC-V single-core processor, up to 160MHz operating frequency, supports 2.4GHz Wi-Fi 6 and BLE 5
• 16MB NOR Flash
• NS4150B : audio power amplifier chip
• ES8311 audio codec chip : high-performance, low-power audio DAC
• ES7210 : ADC chip for echo cancellation circuits
• Batt recharge and discharge management chip
• QMI8658 : 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer 
• PLUS button
• PWR button
• BOOT button
• Microphones
• TF card slot : Onboard antenna
• MX1.25 Lithium Batt header : MX1.25 2PIN connector, for 3.7 Lithium Batt, supports charging and discharging
• USB Type-C port : ESP32-C6 USB port, for programming and log printing
• MX1.25 speaker header
• 1.54inch display panel connector

Outline dimensions:

Resources & Services:

Documentations:

• Wiki

Package Includes:

• ESP32-C6-LCD-1.54
• ESP32-C6-LCD-1.54 host x1
• OPTIONAL 3.7V 1000mAh Lithium Batt x1
• PC insulating sheet x1
• ESP32-C6-Touch-LCD-1.54
• ESP32-C6-Touch-LCD-1.54 host x1
• OPTIONAL 3.7V 1000mAh Lithium Batt x1
• PC insulating sheet x1