This Wireling lets you use a discrete joystick for inputs to your project! This Up, Down, Left, Right joystick board interfaces with an I2C I/O expander to be read by the an Arduino processor or Raspberry Pi!
Please note that this is not a full range joystick. It is a discrete joystick which is essentially 4 buttons mounted sideways at the base of the joystick knob.
Technical Specifications:
SX1505 Specifications:
- 8 Channel GPIO with NINT and NRESET
- Fully programmable logic functions (PLD)
SKRHABE010 Joystick Specifications:
- 4 Directional Digital Joystick
- Center Pushbutton Input
- I2C Semtech SX1505 I/O Expander
TinyDuino Power Requirements:
- Voltage: 3.0V - 5.5V
- Current: 1.0uA (Normal Mode). Due to the low current, this board can be run using the TinyDuino coin cell option
Pins Used:
- A5/SCL - I²C Clock
- A4/SDA - I²C Data
Dimensions:
- 17mm x 10mm (.670 inches x .394 inches)
- Max Height (from the lower bottom of Wireling to upper top Wireling Connector): 16mm (0.63 inches)
Notes:
- You can also use this Wireling without the TinyDuino – modifying the connecting cable by removing the opposite connector and stripping/tinning the wires, you can solder the connector cable to any other development board of your choice!
- 5-Pin Wireling cables not included and sold separately.
Package Includes:
- 1 X Joystick Wireling
Joystick Wireling
- Brand: TinyCircuits
- Product Code: TinyC-Joystick-Wireling
- Reward Points: 5
- Availability: In Stock
-
रo 509.00
- Price in reward points: 509
-
- 25 or more रo 504.00
- 50 or more रo 500.00
- 120 or more रo 496.00
Related Products
TinyShield Joystick
Two Analog Joystick and two push buttons.. This TinyShield lets you add some control t..
रo 2,133.00
Tags: TinyCircuit, Joystick, Wireling
