• RFID/NFC PN532 Shield IC Card Expansion Board for Arduino
RFID/NFC/PN532 Shield IC Card Expansion Boards for Arduino  with White Card FZ0089
 
Here the Eduino PN532 breakout board is taken and turned into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The Eduino NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!
 
NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones
 
Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags)
 
The Eduino shield was designed by RF engineers using the best test equipment to create a layout and antenna with 10cm (4 inch) range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier.
 
This shield is designed to use I2C or SPI communication protocols. I2C is the default, as it uses fewer pins: analog 4 and 5 are used for I2C (of course you can still connect other I2C devices to the bus). Digital #2 is used for "interrupt" notification. This means you don't have to sit there and 'poll' the chip to ask if a target tag has been found, the pin will pull low when a card, phone, etc is within range. You can adjust which pin is used if you need to keep digital #2 for something else. It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB. Compatible with any "classic" Arduino - NG, Diecimilla, Duemilanove, UNO - as well as Mega R3 or later. For using the I2C interface with Mega R2 or earlier, two wires must be soldered as the I2C pins are in a different location on earlier Megas.
 
Package Included:
  • 1 X PN532 RFID/NFC shield
  • 1 X white card

Write a review

Please login or register to review

RFID/NFC PN532 Shield IC Card Expansion Board for Arduino

  • Product Code:PRC-RFID-NFC-Card-Expansion-Board
  • Reward Points:125
  • Availability:Out Of Stock
  • रo 2,060.00
  • रo 1,985.00

  • Ex Tax:रo 1,985.00
  • Price in reward points:2485

Related Products

RFID Blank Card - 125KHz

RFID Blank Card - 125KHz

RFID Blank Card - 125KHz Rectangular - 85 x 54 mm, 1mm thick Note: This RFID card is non re-..

रo 12.00 Ex Tax:रo 12.00

NFC Sticker label for NFC Phone - NTAG203

NFC Sticker label for NFC Phone - NTAG203

NFC Sticker label for NFC Android Phone - NTAG203 Sticker Specifications: Shielded stick..

रo 20.00 रo 30.00 Ex Tax:रo 20.00

NFC Sticker label for NFC Phone - NTAG203 (Colored)

NFC Sticker label for NFC Phone - NTAG203 (Colored)

Colored NFC Sticker label for NFC Android Phone - NTAG203 Sticker Specifications: Shield..

रo 100.00 Ex Tax:रo 100.00

MicroNFCBoard

MicroNFCBoard

MicroNFCBoard from AppNearMe Ltd is the perfect prototyping solution for NFC applications. It is shi..

रo 1,993.00 Ex Tax:रo 1,993.00

Grove - NFC

Grove - NFC

Near Field Communication (NFC) is a set of short-range wireless technologies. It's behind daily appl..

रo 1,933.00 Ex Tax:रo 1,933.00

HydraNFC Shield and HydraNFC Antenna

HydraNFC Shield and HydraNFC Antenna

The HydraNFC is a NFC shield hardware to sniff, read/write or emulate any 13.56MHz NFC tags (with th..

रo 10,531.00 Ex Tax:रo 10,531.00

M1 RFID card (13.56Mhz)

M1 RFID card (13.56Mhz)

Model: FM1108 IC S50   ● Resonance Frequency: 13.56MHZ ● Memory: 8K Bit EEPROM memory ..

रo 227.00 Ex Tax:रo 227.00

NFC Shield V2.0

NFC Shield V2.0

Short for Near Field Communication, NFC is a widely used technology around us. It's behind daily app..

रo 3,026.00 Ex Tax:रo 3,026.00

RFID Book Tag 13.56MHz

RFID Book Tag 13.56MHz

The 13.56MHz RFID book tag can be used in the identification of books.   And it can be r..

रo 140.00 Ex Tax:रo 140.00

Grove - NFC Tag

Grove - NFC Tag

Grove - NFC Tag is a highly integrated Near Field Communication Tag module,this module is I2C interf..

रo 2,508.00 Ex Tax:रo 2,508.00

Grove - 125KHz RFID Reader

Grove - 125KHz RFID Reader

The Grove-125KHz RFID Reader is a module used to read uem4100 RFID card information with two output ..

रo 1,113.00 Ex Tax:रo 1,113.00

125Khz RFID module -UART

125Khz RFID module -UART

One of the coolest part of IoT project must be the identification technology, 125Khz RFID module – U..

रo 1,417.00 Ex Tax:रo 1,417.00

RFID tag combo (125khz) - 5 pcs

RFID tag combo (125khz) - 5 pcs

125Khz, EM4100 standard.   Combo includes: Different color key tag * 3 ..

रo 284.00 Ex Tax:रo 284.00

M1 RFID Tag (13.56MHz)

M1 RFID Tag (13.56MHz)

M1 RFID Tag (13.56MHz) is widely used in electronic locks or customer identification as well as othe..

रo 227.00 Ex Tax:रo 227.00

125khz Writable RFID T5557 / T5567 / T5577 Rewritable Proximity Card for ID Writer Copier Duplicate (Thin Card)

125khz Writable RFID T5557 / T5567 / T5577 Rewritable Proximity Card for ID Writer Copier Duplicate (Thin Card)

125khz Writable RFID T5557 / T5567 / T5577 Rewritable Proximity Card for ID Writer Copier Duplicate ..

रo 170.00 Ex Tax:रo 170.00

Gravity: UART and I2C NFC Module

Gravity: UART and I2C NFC Module

Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, w..

रo 2,498.00 रo 2,879.00 Ex Tax:रo 2,498.00

ProxmarkPro Kit - A handheld RFID and NFC test instrument

ProxmarkPro Kit - A handheld RFID and NFC test instrument

The ProxmarkPro is a portable test instrument designed to quickly discover, identify, and demonstrat..

रo 53,213.00 Ex Tax:रo 53,213.00

Tags: RFID, NFC, PN532, Shield, IC, Card, Expansion, Boards, Arduino

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments