Disclaimer:

Evil Crow RF V2 is a basic device for professionals and cyber-security enthusiasts.
We are not responsible for the incorrect use of Evil Crow RF V2. We recommend using this device for testing, learning and fun.
Be careful with this device and the transmission of signals. Make sure to follow the laws that apply to your country.

Introduction:

Evil Crow RF V2 is a RF hacking device for pen-test and Red Team operations, this device operates in the following

RF bands:* 300Mhz-348Mhz

387Mhz-464Mhz
779Mhz-928Mhz
2.4GHz

Evil Crow RF V2 has two CC1101 RF modules, these modules can be configured to transmit or receive on different frequencies at the same time. Additionally, Evil Crow RF V2 has a NRF24L01 module for other attacks. Note:

All devices have been flashed with basic firmware Evil Crow RF V2 before shipping.
Please do not ask me to implement new functions in this code. You can develop code for Evil Crow RF V2 and send PR with your new code.
Technical support is not provided.

Basic Firmware:

The basic firmware allows to receive and transmit basic signals. You can configure the two radio modules through a web panel via WiFi.
RX: Configure modules and frequency for reception.
TX: Configure modules, frequency, code and bit length to transmit.
Brute-force: Configure frequency, start code and bit length to brute-force.

What makes it special?