• Measures 30mm x 26mm
• Base on TAOS/AMS TSL2561T I2C Light Sensor
• Approximates Human Eye Response
• Programmable Interrupt Function allow user defined upper/lower limit trigger threshold
• Automatically rejects 50/60Hz lighting ripple
• Build with 2 channel of photodiode/ADC to allow more accurate calculation of light intensity (in Lux)
• Can support up to 3pcs of sensor in the same I2C channel
• On board 3.3V regulator
• 2pcs of XH 5pin 2.54 mm pitch connector to allow daisy chain of multiple I2C sensor
• Each device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 20-bit dynamic range (16-bit resolution). Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.

Package Includes : 

• 1 x Pine64 Ambient Light Sensor Module