• Documentation

Open the Box:

Pre-assembled Bittle

If you received the pre-assembled Bittle, you need to insert the neck into the body and bend the knees to natural angles. Drag the curly wire from the knee side to the shoulder side to avoid squeezing when the knee joints rotate. Put the joints into the following posture before turning on the power. 

Long press the battery's button for 2~3 seconds to power on/off. Unplug the insulation sheet of the infrared remote's battery, then you can control Bittle to move. The robot will keep pausing its movements with beeping sounds when the battery is low. Then you need to charge the battery with a 5V micro-USB cable. Considering safety, the battery won't supply power during charging. 

• Here's a more detailed hands-on tutorial on building Bittle from the kit.