The Mini Shield for NanoPi NEO Core/Core2 is a custom SDK carrier board developed for the NanoPi NEO Core and

NanoPi NEO Core2. It has Ethernet port, serial debug port, audio, USB port and etc. 

• 1x Onboard JMS567 USB to SATA IC and 1 x M.2 SSD interface for connecting a 2242 SSD. · 2 x USB Host ports.

 • 1 x Serial debug port for connecting a serial communication board and 1 x Ethernet port. 

• 1x Onboard Microphone and 1 x 3.5mm audio jack for audio recording and playing. · 2x13 Pin header which populate the NanoPi NEO Core/Core2's 10 pins.

 • 1x button and 1 x IR interface for working with a remote control · Room for an SPI Flash(SOP8-200mil) is reserved. Users can solder an SPI flash on the board. . It has the same dimension and mounting holes as those of a Raspberry Pi. The whole board can be well fit into a RPi's case.

Specifications:

• Same form factor as RPi, can be well fit into a RPi's case
• 2 x USB Host 
  
• 1 x Serial debug port and 1 x Ethernet port 
• 1 x audio input and 1 x audio output
• 2x13 Pin GPIO pin-header ·1x Button 
• 1xM.2 2242 SSD interface 
• 1x IR receiver interface
• PCB dimension(mm): 85 x 56

Package Includes:

• 1 x Mini Shield for NanoPi NEO Core/Core2
• 1 x NanoPi K2 Case with Screws & Pads
• 1 x Screw for mounting an SSD hard drive