The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the " Arduino mini" with integrated USB. The "Arduino Nano" has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The "Arduino Nano" automatically senses and switches to the higher power supply, so there is no need for a power select jumper.
The nano's pin layout works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The DFRobot DFRduino Nano USB Microcontroller V3.1 (ATMega 328) can be powered via the mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Features:
- Automatic reset during program download
- Power OK blue LED on the bottom
- Green (TX), red (RX), and orange (L) LED
- +5V to AREF jumper
- Auto-sensing/switching power input
- Small mini-B USB for programming and serial monitor (cable not included)
- ICSP header for direct program downloads
- Power OK blue LED on the bottom
- Standard 0.1” spacing DIP (breadboard friendly)
- Manual reset switch
Specifications:
- Microcontroller: Atmel Atmega328-20AU
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (of which 2KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
Related Products
Arduino Mini 05
The Arduino Mini is a small microcontroller board intended for use on breadboards and when space is ..
रo 1,395.00
Arduino Nano
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduin..
रo 2,195.00 रo 2,738.00
DFRobot DFR0003 DFRduino Mega1280 (Arduino Mega Compatible)
DFRduino Mega1280 is a microcontroller board based on the ATmega1280. It has 54 digital input/output..
रo 1,548.00
DFRobot DFR0216 DFRduino UNO R3 - Compatible with Arduino Uno
DFRduino Uno V3.0 from DFRobot is a physical world computing board of small size for academics or de..
रo 1,158.00
DFRobot SEN0616 Gravity: Thin-film Pressure Sensor for Pressure Science Course
The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film ..
रo 444.79 रo 468.76