WIFI6 Dual ETH Base Board/Mini-Computer Designed For Raspberry Pi Compute Module 4(NOT Included), Onboard M.2 E KEY Slot

CM4-DUAL-ETH-WIFI6-BASE, the IO board of the Raspberry Pi Compute Module 4, is a carrier board that can be used with the Raspberry Pi Compute Module 4 and supports 7~12V DC power supply, and the board has three USB ports 2.0, WIFI6, dual Ethernet ports, suitable for soft routing and other scenarios that require multiple Ethernet ports.

Specifications:

• CM4 SOCKET: suitable for all variants of Compute Module 4
• NETWORKING: Gigabit Ethernet RJ45 connector × 1; 100M Ethernet RJ45 connector × 1
• USB: USB 2.0 port × 3
• PCIE: M.2 E KEY
• PIN HEADER: 40PIN GPIO header × 1
• DSI DISPLAY: MIPI DSI display port × 1, 15pin 1.0mm FPC connector
• CSI CAMERA: MIPI CSI-2 camera port × 2, 15pin 1.0mm FPC connector
• HDMI: HDMI × 2, support 4K 30fps output
• RTC: Real-time clock with battery socket and ability to wake Compute Module 4
• TF CARD SLOT: TF card socket for Compute Module 4 Lite (without eMMC) variants
• POWER INPUT: 7V-36V
• DIMENSIONS: 109.0 × 91.5mm

Onboard Resources:

Note

• 1. Do not unplug any device except USB and HDMI when the power is on.
• 2. Check the fan voltage before connecting. It supports 5V and 12V. The default connection is 12V. Before switching, please modify the resistance of FAN_VCC.
• 3. The Type C interface is only used as a USB SLAVE interface to burn images, and cannot be used as a power supply.
• 4. When CM4 is in normal use, it needs to provide at least a 12V 1.5A power supply. Otherwise, problems such as automatic shutdown and frequency reduction may occur.
• 5. See instructions for use about Opwenwrt.
• 6. This expansion board does not support the POE function.

Package Includes: