FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.

FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learning System, with more added all the time!

The FLORA is small (1.75" diameter, weighing 4.4 grams). The FLORA family also has the best stainless steel threads, sensors, GPS modules and chainable LED NeoPixels, perfect accessories for the FLORA main board. 

The FLORA has built-in USB support. Built in USB means you plug it in to program it, it just shows up - all you need is a Micro-B USB cable, no additional purchases are needed! We have a modified version of the Arduino IDE so Mac & Windows users can get started fast - or with the new 1.6.4+ Arduino IDE, it takes only a few seconds to add Flora-support. The FLORA has USB HID support, so it can act like a mouse or keyboard to attach directly to computers.

FLORA has a small but easy to use onboard reset button to reboot the system. The power supply is designed to be flexible and easy to use. There is an onboard polarized 2 JST battery connector with protection schottky diode for use with external battery packs from 3.5v to 16v DC in. Can be used with LiIon/LiPoly, LiFe, alkaline or rechargeable NiMh/NiCad batteries of any size. The FLORA does not have a LiPo charger included by design, this allows safe use with multiple battery types and reduces risk of fire as it is not recommended to charge these batteries on fabric. We suggest one of our micro-lipo chargers if you want to use LiPo batteries with FLORA.

FLORA has onboard power switch connected to 2A power FET for safe and efficient battery on/off control, so you can power quite a bit without burning out your switch. The FLORA has an onboard 3.3v 250mA regulator with a protection diode and USB fuse so that the microcontroller voltage is consistent and can power common 3.3v modules and sensors.

We spent a lot of time on the power supply because the FLORA power system is specifically designed to allow easy control and power of a large quantity of addressable NeoPixels. Flora can easily drive 50 pixels directly from the onboard power supply, or up to 500 with the pixels externally powered by a separate 5V supply.

  • FLORA is fabric friendly-- all the components on board are flush to the PCB and won't snag delicate garments (it does not use FTDI headers).
  • FLORA is extremely beginner-friendly - it is difficult to destroy the FLORA by connecting a battery backwards due to polarized connector and protection diodes. The on-board regulator means that even connecting a 9V battery will not result in damage or tears.
  • The FLORA has 4 indicator LEDs: power good, digital signal LED for bootloader feedback, data rx/tx. Also onboard is an ICSP connector for easy reprograming for advanced users. Flora v2 even has an RGB NeoPixel for even more colorful lighting.
  • There are 14 sewing tap pads for attachment and electrical connections. Data buses are interleaved with power and ground pads for easy module and sensor attachments without worrying about overlapping traces which are not possible with conductive thread.
  • As of July 7 2016 we're now selling Flora v3 with  alligator-clip friendly pads.
  • The FLORA works great with the Arduino IDE and is super easy to install support if you have IDE 1.6.4 or later

The FLORA is not the first wearable Arduino / Arduino-compatible. Leah Buechley’s Lilypadwas developed in 2007 and while they are both round, FLORA is a completely new platform that works seamlessly with the FLORA accessories.

The FLORA is made in NYC at Adafruit, it was designed by Limor Fried (Ladyada), Adafruit's founder and engineer. Adafruit has a proven track record of providing 100+ high-quality libraries for Arduino/Arduino IDE, hundreds of tutorials, open-source code and contributions to the Arduino project. Ladyada was a member of the MIT wearables group and likes to sew.

You may get an off-white or black JST connector.

Technical Details

Write a review

Please login or register to review

Adafruit 659 FLORA - Wearable electronic platform: Arduino-compatible - v3

  • Brand: Adafruit
  • Product Code:Ada-FLORA-Wearable
  • Reward Points:17
  • Availability:In Stock
  • रo 1,614.00
  • रo 1,430.00

  • Ex Tax:रo 1,430.00
  • Price in reward points:1702

  • 50 or more रo 1,413.00
  • 100 or more रo 1,407.00

Related Products

Adafruit 2795 Feather 32u4 Adalogger

Adafruit 2795 Feather 32u4 Adalogger

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and let..

रo 2,370.00 Ex Tax:रo 2,370.00

Getting Started with Adafruit FLORA

Getting Started with Adafruit FLORA

This book introduces readers to building wearable electronics projects using Adafruit's tiny FLORA b..

रo 225.00 Ex Tax:रo 225.00

Adafruit 1405 FLORA Budget Pack

Adafruit 1405 FLORA Budget Pack

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to ge..

रo 4,312.00 Ex Tax:रo 4,312.00

Adafruit 1090 FLORA GPS Starter Pack

Adafruit 1090 FLORA GPS Starter Pack

Get started with the fabulous Adafruit Flora platform with this lovely starter kit. Included are ple..

रo 9,708.00 Ex Tax:रo 9,708.00

Adafruit 1222 GEMMA v2 - Miniature wearable electronic platform

Adafruit 1222 GEMMA v2 - Miniature wearable electronic platform

Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board w..

रo 1,342.00 Ex Tax:रo 1,342.00

Adafruit 1260 Flora RGB Smart NeoPixel version 2 - Pack of 4

Adafruit 1260 Flora RGB Smart NeoPixel version 2 - Pack of 4

This is the second version of the Flora NeoPixels, which runs at at 'high speed' 800KHz communicatio..

रo 858.00 Ex Tax:रo 858.00

Adafruit 1247 FLORA Accelerometer/Compass Sensor - LSM303 - v1.0

Adafruit 1247 FLORA Accelerometer/Compass Sensor - LSM303 - v1.0

Add motion and direction sensing to your wearable FLORA project with this high precision 3-axis Acce..

रo 1,614.00 Ex Tax:रo 1,614.00

Adafruit 1356 Flora Color Sensor with White Illumination LED - TCS34725

Adafruit 1356 Flora Color Sensor with White Illumination LED - TCS34725

Your electronics can now see in dazzling color with this lovely color light sensor. We found the bes..

रo 858.00 Ex Tax:रo 858.00

Adafruit 1246 Flora Lux Sensor - TSL2561 Light Sensor - v1.0

Adafruit 1246 Flora Lux Sensor - TSL2561 Light Sensor - v1.0

Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The T..

रo 858.00 Ex Tax:रo 858.00

Adafruit 2487 Flora Wearable Bluefruit LE Module

Adafruit 2487 Flora Wearable Bluefruit LE Module

Would you like to add powerful and easy-to-use Bluetooth Low Energy to your wearable FLORA project? ..

रo 1,889.00 Ex Tax:रo 1,889.00

Adafruit 1059 Flora Wearable Ultimate GPS Module

Adafruit 1059 Flora Wearable Ultimate GPS Module

This module is the best way to add a GPS to your wearable project. It's part of the Adafruit Flora s..

रo 2,693.00 Ex Tax:रo 2,693.00

Make: Wearable Electronics

Make: Wearable Electronics

What if your clothing could change color to complement your skin tone, respond to your racing heartb..

रo 475.00 Ex Tax:रo 475.00

Adafruit 1758/ 1757/ 3377/ 1755/ 1756/ 1792 LED Sequins Pack of 5

Adafruit 1758/ 1757/ 3377/ 1755/ 1756/ 1792 LED Sequins Pack of 5

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-siste..

रo 426.00 Ex Tax:रo 426.00

Adafruit 1168 Woven Conductive Fabric - 20cm square

Adafruit 1168 Woven Conductive Fabric - 20cm square

This woven conductive fabric is silver colored and made of Copper+Nickel-plated nylon. Use small pie..

रo 534.00 Ex Tax:रo 534.00

Adafruit 3501 GEMMA M0 - Miniature wearable electronic platform

Adafruit 3501 GEMMA M0 - Miniature wearable electronic platform

The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create ma..

रo 1,133.00 Ex Tax:रo 1,133.00

Adafruit 1088 Conductive Fiber - Stainless Steel 20um - 10 grams

Adafruit 1088 Conductive Fiber - Stainless Steel 20um - 10 grams

This conductive fiber is super interesting! It's great for felting and could also be spun into yarn ..

रo 340.00 Ex Tax:रo 340.00

Adafruit 1197 USB cable - 8" A to Mini B Charging and Micro B Data

Adafruit 1197 USB cable - 8" A to Mini B Charging and Micro B Data

Mini or Micro? Mini or Micro??? Mini AND Micro! This is a handy USB cable, it's compact so you can t..

रo 426.00 Ex Tax:रo 426.00

Tags: FLORA, Wearable, electronic, platform, Arduino, compatible, v3, 659

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments