-
This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming. It's helpful for using products like the JTAGulator, STLink or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector, often Cortex M0 or M3's.
This board comes with no cables. It's really just the breakout board and some header if you need it - but is super helpful when you want to use JTAG/SWD debugging.
-
TECHNICAL DETAILS
- 14mm x 18mm x 7mm / 0.55" x 0.7" x 0.3"
- Weight: 1g
- EagleCAD PCB Files on GitHub
- Fritzing object in Adafruit Fritzing library
Related Products
Adafruit 2094 JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a sli..
रo 593.67
Adafruit 3571 / 2209 SEGGER J-Link EDU/ Mini/ Base - JTAG/SWD Debugger
SEGGER J-Link EDU Mini - JTAG/SWD Debugger: 3571Doing some serious development on any ARM-based..
रo 11,385.27
Adafruit 1675 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long
These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0...
रo 353.67
JTAGulator 32115 JTAGulator Open Source Hardware Debugger SWD UART OCD
On-chip debug (OCD) interfaces can provide chip-level control of a target device and are a..
रo 15,525.00
Adafruit 1465 6-pin AVR ISP Breadboard Adapter Mini Kit
It's rare to find a mini kit so elegant, it deserves its own Haiku. A simple breakout, 2x3 box heade..
रo 120.00
Tags: Adafruit, 2743, SWD, (2x5 1.27mm), Cable, Breakout Board