Description
Reviews (0)

High Performance, Low Power AVR® 8-Bit Microcontroller.

Features

High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
- 120 Powerful Instructions – Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 20 MIPS Througput at 20 MHz
High Endurance Non-volatile Memory segments
- 1K Bytes of In-System Self-programmable Flash program memory
- 64 Bytes EEPROM
- 64 Bytes Internal SRAM
- Write/Erase cyles: 10,000 Flash/100,000 EEPROM
- Data retention: 20 years at 85°C/100 years at 25°C (see page 6)
- Programming Lock for Self-Programming Flash & EEPROM Data Security
Peripheral Features
- One 8-bit Timer/Counter with Prescaler and Two PWM Channels
- 4-channel, 10-bit ADC with Internal Voltage Reference
- Programmable Watchdog Timer with Separate On-chip Oscillator
- On-chip Analog Comparator
Special Microcontroller Features
- debugWIRE On-chip Debug System
- In-System Programmable via SPI Port
- External and Internal Interrupt Sources
- Low Power Idle, ADC Noise Reduction, and Power-down Modes
- Enhanced Power-on Reset Circuit
- Programmable Brown-out Detection Circuit
- Internal Calibrated Oscillator
I/O and Packages
- 8-pin PDIP/SOIC: Six Programmable I/O Lines
- 20-pad MLF: Six Programmable I/O Lines
Operating Voltage:
- 1.8 - 5.5V for ATtiny13V
- 2.7 - 5.5V for ATtiny13
Speed Grade
- ATtiny13V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
- ATtiny13: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
Industrial Temperature Range
Low Power Consumption
Active Mode:1 MHz, 1.8V: 240 µA
Power-down Mode:
< 0.1 µA at 1.8V
High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
- 120 Powerful Instructions – Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 20 MIPS Througput at 20 MHz
High Endurance Non-volatile Memory segments