The camera evaluation kit is based on a 48MP ultra high-resolution SNR image sensor and equipped with a motorized focus Lens. Meanwhile, accompanied by Arducam USB Camera Shield UI tools, it can achieve the adjustment of IR-cut, white balance, exposure, gain, and so on.

It comes with a 48MP camera module and our USB 3.0 camera adapter for you to build quick prototypes and proofs-of-concept with any backend hardware. The dev kit also comes with a complete SDK you can rely on to make easy integration into any machine vision applications. Arducam is committed to creating diverse and convenient camera solutions. For details, please refer to our official website www.arducam.com

Features:

Ultra High Resolution: Based on 48MP Back-illuminated and stacked CMOS image sensor with High signal-to-noise ratio(SNR) and Built-in 2D Dynamic Defect Pixel Correction. Max resolution is 8000(H) x 6000(V).
USB3.0: Adapted with Arducam USB3.0 Camera Shield. Support MIPI camera module communication( 1/2/4 Lane; RAW8/RAW10 hardware analysis; RAW/YUV/RGB/JPG ). The maximum output bandwidth of USB3.0 is 360MB
Motorized Focus: Equipped with a Motorized Focus stock Lens. The focus distance is 8cm to infinite. The motorized focus Lens is capable of focusing at different distances automatically. Manually adjusting the focus by Arducam USB Camera Shield UI tool is also supported.
ISP Process Software: Accompanied with the latest launched Arducam USB Camera Shield GUI software. You can adjust exposure, gain, focus, etc. manually. The most important is, amazing, the ISP function: IR-cut, White Balance, etc.
Wide Compatibility: USB3.0 camera shield is a general-purpose USB camera control board for PC and embedded signal board computers. It hides the complex nature of the camera and provides the plug-and-play camera control interface as well as the ready-to-use SDK library and demo software source code.

Specifications:

Resolution	48MP
Optical Size	1/2.0(8.0mm sensor diagonal)
Number of effective pixels	8000(H) × 6000(V)
Pixel Size	0.8μm × 0.8μm
Camera Interface	MIPI CSI-2 to USB3.0
Shutter Type	Rolling Shutter
Color Filter Array	Quad-Bayer RGB Combine
Common Video Mode	30fps@Full resolution (QBC Re-mosaic) / 30fps@QBC-HDR / 120fps@2x2 Adjacent Pixel Binning (16:9)
Output Format	RAW10/RAW8
F.NO	F1.8
Focus Type	Autofocus
Focal Length	5.1mm
Field of View(FOV)	88°(D)x72°(H)x54.6°(V)
USB Bandwidth	5-Gbps USB3.0 PHY
Camera Databus	32bit@100MHz
I/O Voltage Standard	3.3V
Power Consumption	5V/300mA
Operation Temperature	-10℃～+55℃
Camera Board Size	38mm x 38mm
USB Camera Shield Size	40mm x 40mm

Applications

Cellular phones
Toys and Tablets
Machine vision
ARM/FPGA/DSP based platforms
Product prototyping/development, etc.

Documentation:

Package Includes:

1 x Arducam 48MP Camera Module with Motorized Focus Lens
1 x 38mm 22pin FFC Cable
1 x Arducam USB3.0 Camera Shield
1 x USB3.0 Cable

Notes:

The package contains small contents, please keep it away from children to avoid accidental ingestion
After receiving the package, please confirm whether the contents of the package are consistent with the description