This Arducam quadrascopic camera bundle incorporates four 16MP IMX519 autofocus cameras, and the cutting-edge MIPI stereo camera breakthrough from Arducam – The Arducam Camarray HAT. As the upgraded version of Arducam Synched Stereo Camera HAT, the Camarray further pushes the multi-camera limits and doubles the interfacing capabilities to allow 4 synchronized MIPI camera modules to be interfaced to a single MIPI CSI-2 slot on prevailing single-board computers like Raspberry Pi, Jetson Nano, and Jetson Xavier NX.

Specfications:

• Sensor: Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534)
• Output: RAW10/8, COMP8
• Lens: Autofocus; f/1.75; EFL: 4.28; FoV: 80°;
• Focus Range: 10 cm ~ infinite
• IR cut Filter: Integrated
• Tripod mount: 1/4”-20

Documents:

User Guide

Note:

• The four-channel camera adopts the 2x2 synthesis method, the resolution of the synthesized image remains unchanged, but the frame rate is halved(During synthesis, the first frame outputs the images of camera 0 and camera 1, and the second frame outputs the images of camera 2 and camera 3. Every two frames are combined into a new frame, so the frame rate will be halved). Official Commands and ISP are supported.
• If any camera fails, the composite image can still be output, with the corresponding area of the failed camera being black.
• The camera cannot be removed and directly connected to the Raspberry Pi. The four-channel camera is a customized model, requiring HAT to provide a clock.
  

Packing Includes:

• 4 × IMX519 Camera Module
• 1 × UC-512 Camarray HAT
• 4 × 30cm 15-22pin Camera Cable
• 1 × 7cm 15-22pin Camera Cable
• 1 × Screw Pack