Alternative product ArduCam B0191

As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam released this OV5647 camera module for Jetson Nano. It is designed for both daylight and night vision photography with build-in IR cut filter and two infrared LED illuminator boards. The IR cut filter and the infrared LEDs are automatically ON/OFF according to the light condition and it can be widely used in wild life photography, agriculture NDVI applications and etc.

Key Specifications:

• CMOS size: 1/4inch
• Resolution: 5MP 2592x1944
• Pixel Size: 1.4 x 1.4 um
• Lens: f=2.25mm
• Field of View: Horizontal 85 degree
• Fixed Focus: 30 cm to infinity
• Max frame rate: 30fps
• Video: 1080p at 30 fps, up to 90 fps Video at VGA
• Provides 3.3V power output for infrared LEDs
• Build-in Motorized IR-CUT filter
• Two infrared illuminate LEDs with heat sinks
• Dimension: 36mm X 36mm
• 4 screw mounting holes

Driver Features:

• Support RAW8/10 bayer format
• Support Standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
• Support Single Line Driver Installation Command
• Support OpenCV Friendly and Provides Source Code Demonstration

Applications:

• Smart robots
• Wide life Photograph
• Agriculture NDVI

Additional Resources:

• Arducam Documentation – Arducam Cameras for Jetson Nano
• Video – Arducam MIPI Camera Module for Jetson Nano
• Blog – Arducam MIPI Camera Modules for Jetson Nano

Package Includes:

• 1 x OV56547 IR-CUT Camera
• 1 x Arducam Adapter Board for Jetson Nano
• 2 x Infrared LED Board
• 2 x heat sink
• 1 x 15cm (5.9 inch) flat ribbon cable 15pin 1.0mm pitch to 15 pin 1.0mm pitch
• 1 x 15cm (5.9 inch) flat ribbon cable 15 Pin 1.0mm pitch to 22 pin 0.5mm pitch
• 1 x Acrylic case for the camera module