These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.

This button is an on/off switch button, when you press it the 'normally-open' contact shorts to the common contact and the button stays 'pressed'. When you press it a second time, the button springs open, and the contacts open up again.

Specifications:

Drill hole diameter: 16mm
Switch rating: 3A / 250VDC
Switch contacts: 1 NO, 1 NC
Material: Chrome-plated brass
Contact resistance: < 50 mOhm
Insulation resistance: > 1000 Mohm
Temperature: -20 C to +55 C
Mechanical life: > 500,000
Electrical life: > 50,000
Panel thickness: 1-13mm
Operating pressure: 1.5 - 2.5 N
Operating stroke: 2mm
Lamp rated voltage: 6V

Warranty : 90 days

Package Includes:

1 x Rugged Metal On/Off Switch

Adafruit 482 / 915 / 916 / 917 Rugged Metal On/Off Switch with LED Ring - 16mm

Brand: Adafruit
Product Code:Ada-Rugged-Switch-16mm
Reward Points:5
Availability:In Stock

रo 630.12
Ex Tax:रo 534.00
Price in reward points:564
50 or more रo 552.24
285 or more रo 549.88

Available Options

Color

8) White

9) Blue

10) Red

11) Green

Qty

0 reviews / Write a review