This PiTFT 3.5" is designed to fit nicely onto the original Pi 1 Model A or B but also works OK with the Raspberry Pi Zero, 3, 2 Model B or Pi Model A+ or B+ as long as you don't mind the PCB overhangs the USB ports by 5mm.

Chances are you don't have original Pi, its been many years since they're sold so if you'd like a version that is designed for the Pi Zero / 3 / 2 / A+ / B+ check out the PiTFT Plus 3.5"

Uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x13 header on the bottom, you can connect a standard Pi GPIO cable to it to use any of the other pins ask you like.

• Datasheets, schematic, and PCB files available in the product tutorial
• Display current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA

Package Includes :

1 x Adafruit 2097 PiTFT - Assembled 480x320 3.5" TFT+Touchscreen for Raspberry Pi