• ODROID-C2
 
The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is one of the most cost-effective 64bit development boards available in the ARM world. It can function as a home theater set-top box, a general purpose computer for web browsing, gaming and socializing, a compact tool for college or office work, a prototyping device for hardware tinkering, a controller for home automation, a workstation for software development, and much more. 
 
Some of the modern operating systems that run on the ODROID-C2 are Ubuntu, Android, ARCHLinux, Debian, with thousands of free open-source software packages available. The ODROID-C2 is an ARM device -- the most advanced architecture for mobile devices and embedded 64-bit computing. The ARM processor’s small size, reduced complexity and low power consumption makes it very suitable for miniaturized devices such as wearables and embedded controllers.
  • Amlogic ARM® Cortex®-A53(ARMv8) 1.5Ghz quad core CPUs 
  • Mali™-450 GPU (3 Pixel-processors + 2 Vertex shader processors)
  • 2Gbyte DDR3 SDRAM
  • Gigabit Ethernet
  • HDMI 2.0 4K/60Hz display
  • H.265 4K/60FPS and H.264 4K/30FPS capable VPU
  • 40pin GPIOs + 7pin I2S
  • eMMC5.0 HS400 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
  • USB 2.0 Host x 4, USB OTG x 1 (power + data capable)
  • Infrared(IR) Receiver
  • Ubuntu 16.04 or Android 5.1 Lollipop based on Kernel 3.14LTS

OS Image files and BSP source code are available in our WiKi : http://odroid.com/dokuwiki/doku.php?id=en:odroid-c2

* An additional MicroSD card or an eMMC module is required to install the OS. We recommend the eMMC module as it has much higher performance than standard MicroSD cards.

* ARM 64bit is a very new platform and some system specific Linux softwares are not working stably at this moment. 
   So there might be the compatibility issues frequently and we may need longer time to fix the issues.
* Ubuntu 16.04 LTS is also on the alpha stage and it causes the instability and incompatibility problems.

 

WiKi : http://odroid.com/dokuwiki/doku.php?id=en:odroid-c2

Amlogic S905 DATA SHEET : Available from Q2 2016 

FULL SCHEMATICS : Download HERE

ODROID-C2 PCB Mechanical drawings (AutoCAD format) : Download HERE
 
Official Case 3D data : http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143730080763, The ODROID-C1+ case is fully compatible with ODROID-C2
 
Regulatory Compliance Documents : on process, will be available from Q2 2016 
 
BLOCK DIAGRAM
 
ODROID-C2_Blockdiagram.png
 
BOARD DETAIL  (Click Enlarge)
 
 
 
 

Processor Amlogic S905 Quad Core Cortex™-A53 2GHz 64bit ARMv8 processor with Mali™ -450 GPU
RAM Samsung K4B4G1646D : 2GByte DDR3 32bit RAM (512MByte x 4pcs)
eMMC module socket 8GB / 16GB / 32GB / 64GB MMC from Samsung
The eMMC storage access time is 2-3 times faster than the SD card. You can purchase 4 size options: 8GB, 16GB, 32GB and 64GB. Using an eMMC module will increase speed and responsiveness, similar to the way in which upgrading to a Solid State Drive (SSD) in a typical PC also improves performance over a mechanical hard drive (HDD).
Micro Secure Digital (MicroSD) Card slot There are two different methods of storage for the operating system. One is by using a MicroSD Card and another is using an eMMC module, which is normally used for external storage for smartphones and digital cameras. The ODROID-C2 can utilize the newer UHS-1 SD model, which is about 2 times faster than a normal class 10 card.
Note that there are some cards which needs additional booting delay time around 30 seconds.
According to our test, most Sandisk Micro-SD cards don't cause the booting delay. We will make a compatibility list soon.
5V2A DC input This is for 5V power input, with an inner diameter of 0.8mm, and an outer diameter of 2.5mm. The ODROID-C2 consumes less than 0.5A in most cases, but it can climb to 2A if many passive USB peripherals are attached directly to the main board.(Can be purchased here)
USB host ports There are four USB 2.0 host ports. You can plug a keyboard, mouse, WiFi adapter, storage or many other devices into these ports. You can also charge your smartphone with it! If you need more than 4 ports, you can use a powered external USB hub to reduce the power load on the main device.
HDMI port Type-A standard HDMI connector.
Ethernet RJ-45 jack The standard RJ45 Ethernet port for LAN connection supports 10/100/1000Mbps speed.
Green Flashes when there is 100Mbps connectivity
Yellow Flashes when there is 1000Mbps connectivity
Status / Power LEDs The ODROID-C2 has four indicator LEDs that provide visual feedback.
Red Power Hooked up to 5V power
Blue Alive Solid light : u-boot is running
Flashing : Kernel is running ( heart beat)

 
Infrared (IR) receiver This is a remote control receiver module that can accept standard 37.9Khz carrier frequency based wireless data in NEC format.
Micro USB OTG port You can use the standard micro-USB connector with Linux Gadget drivers on your host PC, which means that the resources in the ODROID-C2 can be shared with typical PCs. You can also add a micro-USB to HOST connector if you need an additional USB host port. 
You can also power the C2 via this port using stable 5V/2A USB charger. 
General Purpose Input and Output (GPIO) ports These 40pin GPIO port can be used as GPIO/I2C/UART/ADC for electronics and robotics. 
The 40 GPIO pins on an ODROID-C2 are a great way to interface with physical devices like buttons and LEDs using a lightweight Linux controller. If you’re a C/C++ or Python developer, there’s a useful library called WiringPi that handles interfacing with the pins. We’ve already ported the WiringPi v2 library to ODROID-C2.
Please note that pins #37, #38 and #40 are not compatible with Raspberry Pi B+ 40pin header. Those pins are dedicated for Analog input function.
Also note that all the GPIO ports are 3.3Volt. But the ADC inputs are limited to 1.8Volt.
Serial console port Connecting to a PC gives access to the Linux console. You can see the log of the boot, or to log in to the C2 to change the video or network settings. Note that this serial UART uses a 3.3 volt interface. We recommend the USB-UART module kit from Hardkernel.
Gigabit Ethernet PHY Realtek RTL8211F is a highly integrated Ethernet transceiver that complies with 10Base-T, 100Base-TX, and 1000Base-T IEEE 802.3 standards.
USB MTT hub controller GENESYS LOGIC GL852G is used to implement the 4-port Hub function which fully complies with Universal Serial Bus Specification Revision 2.0. 
USB VBUS controller NCP380 Protection IC for USB power supply from OnSemi.
   
Power switch port You can add a slide switch or rocker switch on this port if you want to implement a hardware on/off switch.
If this port is closed, the power is off.
If this port is opened, the power is on.
Power supply circuit Discrete DC-DC converters and LDOs are used for CPU/DRAM/IO power supply.
Power protector IC NCP372 Over-voltage, Over-current, Reverse-voltage protection IC from OnSemi.

GPIO PIN-MAP

 

 

 

 

 

 

 

 

 

 

 

ODROID-C2 40pin Layout

 

Power Pin

 

 

 

Special Function

 

 

 

GPIO/Special Function

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WiringPi GPIO#

Export GPIO#

ODROID-C2 PIN

Label

HEADER

Label

ODROID-C2 PIN

Export GPIO#

WiringPi GPIO#

 

 

 

3V3

1

2

5V0

 

 

 

 

205

I2CA_SDA

SDA1

3

4

5V0

 

 

 

 

206

I2CA_SCL

SCL1

5

6

GND

 

 

 

7

249

GPIOX.BIT21

#249

7

8

TXD1

TXD_B

113

 

 

 

 

GND

9

10

RXD1

RXD_B

114

Processor Specifications
Processor 3 Pixel-processors + 2 Vertex shader processors
Number of Cores Quad core
Architecture Amlogic ARM Cortex-A53 ARMv8
Speed 1.5Ghz
Board Specifications
SD Card Support MicroSD Card slot
GPIO 40pin GPIO
Memory Specifications
RAM 2Gbyte DDR3 SDRAM
Connectivity
Wi-Fi Realtek RTL8211F
Ethernet Gigabit Ethernet
Electrical Specifications
Input Power 5V2A DC

Write a review

Please login or register to review

ODROID-C2

  • Brand: Hardkernel
  • Product Code:hdk-ODROID-C2
  • Reward Points:58
  • Availability:Discontinued
  • रo 5,375.00

  • Ex Tax:रo 5,375.00
  • Price in reward points:5750

Available Options


Related Products

ODROID MicroSD UHS-1 C1+ Android

ODROID MicroSD UHS-1 C1+ Android

MicroSD UHS-1 C1 Android for ODROID-C1   Features: Sequential Write speed..

रo 1,052.00 Ex Tax:रo 1,052.00

ODROID MicroSD UHS-1 C1+ Linux

ODROID MicroSD UHS-1 C1+ Linux

MicroSD UHS-1 C1 Linux for ODROID-C1   Features: Sequential Write speed :..

रo 1,052.00 Ex Tax:रo 1,052.00

Power Adapter 5V 2A for Odroid

Power Adapter 5V 2A for Odroid

Power Adapter 5V-2A, Compatible with ODROID-X / X2 / U2 / U3 / W(Dock) / C1 Specificaitons ..

रo 400.00 Ex Tax:रo 400.00

Micro USB OTG Cable - 4 Port

Micro USB OTG Cable - 4 Port

This is a multifunctional USB OTG Host Hub Adapter Cable. Compatible with all tablets and ce..

रo 440.00 Ex Tax:रo 440.00

Odroid C2/ C1+ Case

Odroid C2/ C1+ Case

For those who appreciate the beauty of the naked PCB board – but still wants to protect the ODROID-C..

रo 592.00 Ex Tax:रo 592.00

HDMI A to VGA Adapter with Audio

HDMI A to VGA Adapter with Audio

HDMI male to VGA 15 pin female adapter with Audio..   Features: HDMI with 24k Gold-p..

रo 1,121.00 Ex Tax:रo 1,121.00

Cable USB-A male to USB Micro-B male - Flat Noodle Type

Cable USB-A male to USB Micro-B male - Flat Noodle Type

Flat Nnoodle type USB-A male to USB Micro-B male cable. Length = Approx 1m Note: Color may v..

रo 240.00 Ex Tax:रo 240.00

Odroid USB GPS Module

Odroid USB GPS Module

Works with C1 / U3 / XU3 / XU4 / C0 / C2 Android and Ubuntu OS. Ublo..

रo 2,630.00 Ex Tax:रo 2,630.00

Odroid IR Remote Controller

Odroid IR Remote Controller

Odroid IR Remote Controller : Works with the ODROID-C1 / C0 / C2 / N2 / N2+ / C4 / HC4..

रo 526.00 Ex Tax:रo 526.00

UP board 1GB/2GB/4GB RAM + 16GB/32GB/64GB eMMC

UP board 1GB/2GB/4GB RAM + 16GB/32GB/64GB eMMC

UP board 1GB/2GB/4GB RAM + 16GB/32GB/64GB eMMC UP unleashes the power of the Intel x5-Z8350 Quad..

रo 18,327.00 Ex Tax:रo 18,327.00

eMMC Module C2 Linux

eMMC Module C2 Linux

Pre-installed Ubuntu or Android Ready to run out of the box eMMC Version 5.1 interface o..

रo 1,302.00 Ex Tax:रo 1,302.00

RTC Shield for ODROID-C2

RTC Shield for ODROID-C2

Real Time Clock Shield for the ODROID-C2 Just mount this RTC Shield on the GPIO port of the ODR..

रo 592.00 Ex Tax:रo 592.00

ODROID MicroSD UHS-1 XU4 Linux

ODROID MicroSD UHS-1 XU4 Linux

ODROID MicroSD UHS-1 XU4 Linux. Also compatible with ODROID-HC1, ODROID-HC2, ODROID-MC1, ..

रo 1,052.00 Ex Tax:रo 1,052.00

eMMC Module C2 Android

eMMC Module C2 Android

Pre-installed Ubuntu or Android Ready to run out of the box eMMC Version 5.1 interface o..

रo 1,302.00 Ex Tax:रo 1,302.00

Uninterrupted Power Supply UPS3 for Odroid

Uninterrupted Power Supply UPS3 for Odroid

The UPS3 is designed specifically for the ODROID-C1 / C1+ / C2.  Uninterrupted Power Suppl..

रo 5,786.00 Ex Tax:रo 5,786.00

MicroSD UHS-1 C2 Android

MicroSD UHS-1 C2 Android

MicroSD UHS-1 C2 Android for ODROID-C2   Features: Sequential Write speed..

रo 1,052.00 Ex Tax:रo 1,052.00

RTC Backup Battery

RTC Backup Battery

Lithium primary battery to back up the Real Time Clock The below listed ODROID bo..

रo 329.00 Ex Tax:रo 329.00

oCam : 5MP USB 3.0 Camera

oCam : 5MP USB 3.0 Camera

oCam : 5MP USB 3.0 Camera   The oCam supports plug-and-play by UVC compliant adapti..

रo 12,624.00 Ex Tax:रo 12,624.00

USB-DC Plug Cable 2.5x0.8mm

USB-DC Plug Cable 2.5x0.8mm

For ODROID-C1 / C0 / C2   DC Plug specification : Inner diameter 0.8mm and outer diamet..

रo 250.00 Ex Tax:रo 250.00

ODROID-VU8C : 8inch Touch Display Shell Kit

ODROID-VU8C : 8inch Touch Display Shell Kit

  8inch multi-touch screen for ODROID-C2 and C1+ It gives users the ability ..

रo 9,450.00 Ex Tax:रo 9,450.00

USB 3.0 AM to Micro USB Cable

USB 3.0 AM to Micro USB Cable

USB 3.0 AM to Micro USB Cable Cable length : 40cmNote: The supplier of the product has no ..

रo 394.00 Ex Tax:रo 394.00

ODROID-VU5A : 5inch 800x480 HDMI display with Multi-touch And Audio Capability

ODROID-VU5A : 5inch 800x480 HDMI display with Multi-touch And Audio Capability

ODROID-VU5A : 5inch HDMI display with Multi-touch and Audio capability   The OD..

रo 6,575.00 रo 7,232.00 Ex Tax:रo 6,575.00

eMMC Module for Odroid - H2/H3

eMMC Module for Odroid - H2/H3

eMMC Module for Odroid: Cutting-edge and competitive, eMMC offers incredible performance at a fa..

रo 1,302.00 Ex Tax:रo 1,302.00

C Tinkering Kit for ODROID-C2 /C1+

C Tinkering Kit for ODROID-C2 /C1+

You’re probably itching to make some fun embedded computer projects with ODROID-C2 or C1+. What you ..

रo 2,104.00 Ex Tax:रo 2,104.00

ODROID-VU7A Plus: 7inch HDMI display with Multi-touch and Audio capability

ODROID-VU7A Plus: 7inch HDMI display with Multi-touch and Audio capability

The ODROID-VU7A Plus is your new 7-inch multi-touch screen for the ODROIDs with audio capability!7-i..

रo 9,599.00 Ex Tax:रo 9,599.00

Tags: Quadcore, linux, computer, ODROID, C2

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments