• Pololu 701 IR Beacon Transceiver

Pololu’s new IR beacon (infrared beacon) is an updated version of our original IR beacon. Like the original unit, the devices are transceivers meant to be used in pairs to give robots a simple means for detecting each other. You can use the beacons to build pairs of robots that interact or chase one another, or to make a robot that can identify and return to a home base. For example, you could build a “cat robot” and “mouse robot” that each have an IR beacon, where the cat chases the mouse and the mouse runs away from the cat. The beacons are ideal for autonomous robot contests in which robots compete in pairs, such as MIT’s annual 6.270 autonomous robot design competition, where our original beacons were used for several years.

 


 

The new IR beacons feature round PCBs with six wide-angle emitters to provide uniform broadcasting in all directions. The operating voltage range has increased to 6 – 16 V, and on-board voltage monitoring enables a more consistent output brightness over the voltage range. Most components are pre-assembled, so all you need to solder is the capacitor, connectors, and sensors (make sure you solder them in from the bottom of the PCB!).

Note: The Pololu IR beacon is a kit; before using it, you need to assemble the beacon by soldering its components onto its circuit board. To use the kit in robotics projects, you need to connect it to your own robot controller. Please note that the IR beacons only work in pairs and that certain kinds of artificial lighting (e.g. some fluorescent lights) can interfere with the sensors.

Device Specifications

  • PCB size: 1.35" circle
  • IR modulation frequency: 56 kHz
  • Output refresh rate 20 Hz
  • Detection range: 6 inches to 20 feet
  • Supply voltage: 6-16 V
  • Data voltage: 5 V
  • Number of IR detectors: 4

How the IR Beacons Work

(The following animations show the old IR beacon, but the operating principle is the same in the new, round units.)

The beacons work by transmitting and detecting infrared light, much like a television remote control. Each beacon has four IR emitters and four IR detectors. The beacons alternate between transmitting and receiving so that they never get confused by reflections of their own transmissions.

 

 

The transmit and detect cycle is carried out more than one thousand times per second, and a small microcontroller monitors all four detectors to decide the direction to the other beacon. The beacons have four red LEDs that indicate the direction to the other beacon; if you take two beacons and rotate them, the LEDs will always keep lighting up in the direction of the other beacon.

 

 

Interfacing to the beacon is simple — it has four digital outputs that indicate which of its four sides detects the other beacon the strongest. You can establish the direction to another beacon to within a few degrees by rotating the beacon back and forth and noting the point where the output switches from one side to another. An enable input lets you select between active mode and a low-power mode.

IR Beacon Development Kit (Transmit-Only Beacon)

In response to customer requests, the IR beacon is available as just an assembled PCB with no IR sensors or firmware. This item is intended for advanced users who want to customize their IR beacon functionality by writing their own firmware. The main processor is a Microchip PIC16F630, and the PCB includes a footprint for a 5-pin header compatible with the PIC kit 2 programmer. The IR Receiver Modules are available separately. The schematic is shown below and is the only documentation shipped with this IR Beacon Development kit:

 


 

It is important to note that the IR beacon achieves its brighness by pulsing the IR LEDs with very high currents; turning on the IR LEDs continuously will burn them out. When testing the IR beacon, a digital camera can be useful in determining whether the IR LEDs are on. However, some cameras (usually more expensive ones) have better filters that block IR. In the picture below, a point-and-shoot camera shows the IR LEDs shining (in purple) but the DSLR with which the picture is taken does not show the LEDs.

 


 

 

Write a review

Please login or register to review

Pololu 701 IR Beacon Transceiver

  • Brand: Pololu
  • Product Code:Pololu-IR-Beacon-Transceiver
  • Reward Points:21
  • Availability:In Stock
  • रo 2,089.00

  • Ex Tax:रo 2,089.00
  • Price in reward points:2089

  • 7 or more रo 2,072.00
  • 14 or more रo 2,056.00
  • 25 or more रo 1,958.00
  • 35 or more रo 1,942.00
  • 70 or more रo 1,926.00

Related Products

Infrared Receiver Kit

Infrared Receiver Kit

The Infrared Shield Kit allows you to connect a infrared receiver with the Digispark development boa..

रo 300.00 रo 786.00 Ex Tax:रo 300.00

Photoconductive LDR 1K

Photoconductive LDR 1K

This is a very small light sensor. A photocell changes resistance depending on the amount of light i..

रo 6.00 रo 8.00 Ex Tax:रo 6.00

LED - Infrared Transmitter 850nm / 940nm

LED - Infrared Transmitter 850nm / 940nm

  This is a high quality clear infrared LED. These devices operate between 840-850nm and work we..

रo 5.00 Ex Tax:रo 5.00

Me Line Finder

Me Line Finder

The Me – Line finder is designed based on two infrared reflective sensors. It has one 4Pin RJ10 conn..

रo 560.00 Ex Tax:रo 560.00

KY-005 - Infrared Emitter Module

KY-005 - Infrared Emitter Module

  High Quality Infrared emission sensor module for Arduino....

रo 55.00 Ex Tax:रo 55.00

KY-033 - Tracing Black / White Line Hunting Sensor Module For Arduino

KY-033 - Tracing Black / White Line Hunting Sensor Module For Arduino

Infrared obstacle avoidance for Arduino !   Specifications: Working Voltage : 3.3V - 5..

रo 67.00 Ex Tax:रo 67.00

IR Object Sensor Module

IR Object Sensor Module

IR Object Sensor Module! Features: Upto 10cm range 10k Pot onboard for ra..

रo 55.00 रo 65.00 Ex Tax:रo 55.00

PICAXE-Infra-red Upgrade Pack AXE040

PICAXE-Infra-red Upgrade Pack AXE040

An upgrade pack to enable the PICAXE system to support infra-red control. Includes a TV style remote..

रo 1,350.00 Ex Tax:रo 1,350.00

PICAXE-Infra-red Remote Control TVR010

PICAXE-Infra-red Remote Control TVR010

TV style remote control handset for use with PICAXE projects and projects. Compatible with all PICAX..

रo 895.00 Ex Tax:रo 895.00

Photoconductive LDR - Big

Photoconductive LDR - Big

This is a light sensor bigger then normal LDR. A photocell changes resistance depending on the amoun..

रo 110.00 Ex Tax:रo 110.00

KY-032 Obstacle avoidance sensor module for Arduino

KY-032 Obstacle avoidance sensor module for Arduino

KY-032 Obstacle avoidance sensor module for Arduino! Specifications Working voltage..

रo 134.00 Ex Tax:रo 134.00

KY-022 Infrared Sensor Receiver Module

KY-022 Infrared Sensor Receiver Module

  Infrared sensor receiver module KY-022   Specifications: Infrared remote contr..

रo 40.00 रo 160.00 Ex Tax:रo 40.00

IR Distance Sensor - Sharp GP2Y0A21YK0F

IR Distance Sensor - Sharp GP2Y0A21YK0F

IR Distance Sensor - Sharp GP2Y0A21YK0F with wire connector Features and Specifications: ..

रo 481.00 Ex Tax:रo 481.00

Grove - Infrared Reflective Sensor

Grove - Infrared Reflective Sensor

The reflectivity of infrared light varies with the color and distance of the reflecting surface. Acc..

रo 595.00 Ex Tax:रo 595.00

RGB Color and Gesture Sensor For Arduino

RGB Color and Gesture Sensor For Arduino

Wave your hands and light turns on. Can you believe this magic turns into reality? This sensor ..

रo 1,195.00 रo 1,378.00 Ex Tax:रo 1,195.00

300mm Infrared Shooting Sensor

300mm Infrared Shooting Sensor

  This sensor has two parts. The transmitting part has red wire and black wire. The red wire..

रo 792.00 Ex Tax:रo 792.00

Laser Ranging Sensor World Smallest Time-of-Flight (ToF) GY-530 VL53L0X

Laser Ranging Sensor World Smallest Time-of-Flight (ToF) GY-530 VL53L0X

Infrared distance measurement module   Model: GY - VL53L0X   Using the chi..

रo 387.00 Ex Tax:रo 387.00

IR Sensor TSOP1738

IR Sensor TSOP1738

The TSOP 1738 is a member of IR remote control receiver series. This IR sensor module consists of a ..

रo 74.00 Ex Tax:रo 74.00

Grove - Infrared Reflective Sensor v1.2

Grove - Infrared Reflective Sensor v1.2

Grove - Infrared Reflective Sensor v1.2 can be used for detection of proximity and color of objects...

रo 493.00 Ex Tax:रo 493.00

TSAL6200 EMITTER LED 5MM HI EFF 940NM

TSAL6200 EMITTER LED 5MM HI EFF 940NM

  TSAL6200 EMITTER LED 5MM HI EFF 940NM..

रo 11.00 Ex Tax:रo 11.00

Grove - IR Distance Interrupter

Grove - IR Distance Interrupter

V1.2 Description is below    Grove - IR Distance Interrupter..

रo 387.00 Ex Tax:रo 387.00

Pololu 1131/1135/2466 Digital Distance Sensor - Sharp GP2Y0D805Z0F, GP2Y0D810Z0F, GP2Y0D815Z0F

Pololu 1131/1135/2466 Digital Distance Sensor - Sharp GP2Y0D805Z0F, GP2Y0D810Z0F, GP2Y0D815Z0F

This small digital distance sensor detects objects between 2 cm and 10 cm (0.8″ and 4″) away. With i..

रo 697.00 Ex Tax:रo 697.00

Grove - Infrared Receiver

Grove - Infrared Receiver

The Infrared Receiver is used to receive infrared signals and also used for remote control detection..

रo 359.00 Ex Tax:रo 359.00

Grove - Infrared Emitter v1.2

Grove - Infrared Emitter v1.2

The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an..

रo 400.00 Ex Tax:रo 400.00

Tags: Pololu, IR, Beacon, Transceiver

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments