Categories

BLE Nano

BLE Nano
BLE Nano
Scroll and tap to view images
BLE Nano BLE Nano BLE Nano BLE Nano
Brand: RedBearLab
Product Code: RBL-BLE-Nano-Board
Reward Points: 20
Availability: Discontinued
Price: रo 1,785.00 रo 1,585.00
Price in reward points: 1785
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

  

  - OR -   Add to Wish List
Add to Compare

BLE Nano is the smallest Bluetooth 4.1 Low Energy (BLE) development board in the market. The core is Nordic nRF51822 (an ARM Cortex-M0 SoC plus BLE capability) running at 16MHz with ultra low power consumption.

Developing a Bluetooth Smart enabled 'appcessory' (accessory device + companion application) is easier than ever. You can quickly produce protypes and demos target for Internet of Things (IoT) and other interesting projects. BLE Nano could operate under 1.8V to 3.3V, therefore it works with a lot of electronic components.

Note: You must have at least one set of BLE Nano Kit because you will need the companion board, MK20 USB board, which is used to load firmware into BLE Nano from a PC.

Current supported BLE central devices:

iOS 7 or 8

  • iPhone 4s
  • iPhone 5/6 (all models)
  • iPod touch 5
  • iPad 3/4/mini/Air

Android 4.3 or above (4.4 recommended for stability) with Bluetooth 4.0 hardware support

Windows Phone 8.1

  • Nokia Lumia 630

Programming

There are three options to program your BLE Nano with MK20 USB Board.

Nordic nRF51822 BLE SDK
If you want the full power of nRF51822, you should use Nordic nRF51822 BLE SDK, we provide a product key for all registered users* of our BLE Nano to download the SDK.
We have prepared a guide "Firmware Development with nRF51822 SDK" to show you how to use the SDK with ARM GCC.

mbed's Bluetooth Low Energy API
The mbed platform, developed by ARM, provides free software libraries and online tools for professional rapid prototyping of products based on ARM microcontrollers. Their Bluetooth Low Energy Development Team has released the mbed BLE API together with 10+ samples.
"Getting Started with nRF51822" guide shows you how to start programming with mbed.

Arduino Library for nRF51822
We have developed an Arduino library for nRF51822 which will be open-sourced and publicly available in the future; it is still at pre-release stage but we invite all interested registered users* of our BLE Nano to access the pre-release library and sample sketches including BLE Controller, Beacon, Heart Rate Monitor etc. Please refer to  "Getting Started with nRF51822" guide for more details.

BLE Nano Specification

Microcontroller Nordic nRF51822
CMSIS-DAP Chip Freescale MK20
Operating Voltage 1.8V to 3.3V
Input Voltage 1.8V-3.3V (VDD)
3.3V-13V (VIN)

Caution: Use either one power source at a time, otherwise you will damage the board.
Clock Speed 16MHz
Connectivity Bluetooth 4.0 Low Energy
Serial (TX/RX)
I2C
SPI
Flash Memory 256KB
SRAM 16KB
Dimensions 18.5 x 21.0mm
I/O Pins 11


For more information regarding BLE Nano please visit the official site.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: