Categories

BLE Mini - Bluetooth 4.0 Low Energy Module

BLE Mini - Bluetooth 4.0 Low Energy Module
BLE Mini - Bluetooth 4.0 Low Energy Module
Scroll and tap to view images
BLE Mini - Bluetooth 4.0 Low Energy Module BLE Mini - Bluetooth 4.0 Low Energy Module BLE Mini - Bluetooth 4.0 Low Energy Module BLE Mini - Bluetooth 4.0 Low Energy Module
Brand: RedBearLab
Product Code: RBL-BLE-Mini
Reward Points: 20
Availability: Discontinued
Price: रo 1,485.00
Price in reward points: 1485
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

  

  - OR -   Add to Wish List
Add to Compare
You can now incorporate Bluetooth 4.0 Low Energy (BLE) technology easily in your project with our BLE Mini. BLE Mini requires only a serial port for communication so it supports all major development platforms that have UART interface including Arduino, Raspberry Pi, Netduino, BeagleBone etc. In addition, we provide you with access to all Ti's CC2540 I/O pins and the ability to upload firmware via USB, making the BLE Mini an ideal development/prototyping board for your BLE project/accessory/Appcessory.
 
Features
 
Simple interface - with our pre-loaded firmware code name 'Biscuit', you could easily connect to any development board or IC with UART interface.
 
Compact form factor - (L)39mm x (W)18.5mm x (H)3.8mm this is a very popular request from makers using smaller Arduino boards like Arduino Mini/Micro/Nano/Pro Mini etc.
 
Support Central or Peripheral role - it can connect to other BLE Mini or BLE Shield, not just iOS device.
 
Standalone operation - Texas Instruments (TI) CC2540 is a SoC (System-on-Chip) IC that can operate without any external microcontroller. You can develop your own firmware using IAR Embedded Workbench for 8051 Compiler , all I/O pins of CC2540 are accessible.

Hardware Overview

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • RedBear Bluetooth 4.0 Low Energy Module (model: RBT01), Bluetooth SIG certified with on-board chip antenna
  • Texas Instruments CC2540 2.4 GHz Bluetooth System-on-Chip (SoC)
  • Dimension - (L)39mm x (W)18.5mm x (H)3.8mm
  • On-board programmable components - 512Kb EEPROM, 2 LEDs (Blue & Green), Push Button
  • Accessories included - Coin Cell Battery holder & 3 connectors
  • BLE Mini Schematic is available
  • Powering options - 3.4V to 11V VIN / 5V USB / Coin Cell Battery (2025 or 2032) / 3.7V Li-ion Battery 
  • Do not connect more than one power source at the same time, otherwise you will damage the board.
Technical Details
 
Power Supply
 
Do not connect more than one power source at the same time, otherwise you will damage the board.
 
You have three options to power BLE Mini 
  • VIN pin (J4), 3.6V to 11V 
  • Micro USB connector, 5V 
  • Coin Cell Battery, 2.3V to 3.6V

Connector

Please visit RedBearLab for more info about this product and technical support.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: